-
Content Count
380 -
Joined
-
Last visited
Posts posted by coolie11
-
-
i took a picture of it...from that picture you will see the plug i got from lowes....
also, should i use a 3 prong and attach the ground cable to it?
This plug is for suppling the power supply with power from a regular 110/120V AC outlet.
Yes you should add a ground from the power outlet to the power supply.
-
no, i had to get one from lowes and attach from the wires from the power supplyI'm not sure what you talking about.
Give me a part #.
If it's the plug to connect the power supply to the camera, then if will not matter which line is used since you are using AC power.
-
also, on the 2 prong plug i attached to the power supply, white is positive and black is negative? will that make a difference?Are you refering to the power cord that supplies power to the power supply?
-
Not seen by the human eye.
-
Depends on the amount of lighting available when the lights are dimmed.
If you will be able to see comfortably with lights dimmed then I will go with a high res low light camera.
-
If that's the case I don't see any problem.
AC wiring is non polarity sensitive.
Check the cameras manual and make sure the camera auto negotiates between AD/DC Voltage, either way it should show you the wiring scheme.
Most Bullet camera's are DC, the manual maybe for various models, make sure the specs apply to your model.
-
I've never used one of these before, but most DVR setup is typical.
If you are trying to remote access with the client software you need to open more ports than just port 80.
I'm not sure what ports this unit use, but if can post the manual or PM me I'll be ,re than happy to help.
Make sure and give the unit a static IP address for your local network, then port forward to that IP address, you will be able to remote access the DVR on the local network without forwarding any ports.
-
The altv2416ul is a 24V AC power supply and the Bullet Camera you hooked up to it might be a 12V DC Camera.
Post the model of the camera you used.
And yes the P & N Stands for positive and negative.
-
What equipment do you have?
-
-
If you're going to spend $150. on Camera's and use Balun's to transmit the video why even bother installing anything unless I'ts just for someone to know you have camera's
Other than that you seem to have the idea of what needs to be done.
-
Since you have the ability to cable with no issues, I would install 1 Siamese and 1 or 2 Cat 6's for each location you intend to install a camera.
I had to cable my home externally using conduit.
Siamese Cable in case the budget can't fit IP cam's now or just the fact that there isn't any IP cam's decent enough for exterior applications to install on this house.
In the future when the technology advances you will hopefully be prepared.
Right now I will just go with surface dome's matched to your environment, which will look really nice.
Tried to post some pics but got some sort of ftp error.
No Light.
-
P.S. if you need assistance with this I can provide some remote assistance.
just PM Me and I'll give you the specifics.
-
Go into network settings for the dvr and assign it a static IP address.
Then forward the ports for that address.
Start
Control Panel
Network Connection
Right Click Local area connection and select properties
Double click on Internet Protocol (TCP/IP)
Select Use the Following IP address
Input the IP address you want to use
Subnet would be 255.255.255.0
Gateway will be the routers IP address
Select use the following DNS Server address
Input the same IP address as the gateway for the Preffered DNS Server
No need for Alternate DNS Server
-
If you're happy with the images from the cameras you already have, then you can buy a regular DVR and use these.
http://macecatalog.com/cctv2.asp?Model_ID=473&Task=Detail
Or
http://www.covisec.com/product/ALD-400LCDR?META=bizrate-ALD-400LCDR
-
Is there any 16Ch 480ips Full D1 standalone systems?
-
Sorry. My mistake.
I was only going by what I saw on there web site.
Where are they availabe for purchase.
-
I looked at the info on there site but didn't see the specs you mentioned.
This is the info I found for the DS-4016HCSI of there web site:-
'Note: The DS-4016HCSI can be set as 16 Channels QCIF/CIF compression resolution, it doesn't support DCIF/2CIF/4CIF compression resolution . '
-
Dude just the fact that you get routed to the router setup page means your ports are not forwarded properly.
Try what I suggested, and use your public IP not your dyndns account with the client first.
Once that work change your dyndns to a port redirect for the port of the server and you will be good to go.
I've done many of these with similar scenarios, and now I just set them up the way I mentioned, no problem.
If you want I can take a look at your router or even try to connect to your sever for testing.
Even though it appears that you're looking for assistance from someone else other than me.
-
Set the port on the server to 9000.
Then do the port forward for the server ip in the router.
This looks like a simple system, you should be fine.
Always try connecting to dvr with the client software before attempting to IE or any web browser.
The client software and the browser remote connection authenticates differently.
USE PORT RANGE FORWARDING NOT SINGLE PORT FORWARDING.
USE THE SAME PORT AS THE START AND END.[/u][/b]
-
It apears that the default port for these units is 80, did you change the port on the system to 888?
Dose it work with the client?
-
What's the model #.
CPD561
CPD560
CPD502A
CPD501
I would like to look at the manual, maybe I can find it online.
Does it mention the ports in the manual?
Does the port #'s match on the server and router?
-
I have no idea.
Manual not available for download.
Could you upload the manual?
Are you sure the port is forwarded the right way.
Are you remoting through web or client?
-
first thing is to give the dvr a static IP.
Then open the ports for that IP.
Try connecting using your public IP and not your dyndns.
If it works with your public IP then you can fine tune you dyndns account to be forwarded properly.
Which DVR is it (model)?
Does it require more than one port?
power supply question...
in Installation Help and Accessories
Posted
There is no polarity for AC power.