letullio
-
Content Count
6 -
Joined
-
Last visited
Posts posted by letullio
-
-
Ok, i will change the cable. But, do you say the problem is the DVR? Because i tried with two differents models ds-7208hqhi-f1/nio4a and DS-7208HQHI-K1 and i have the same problem.
However, with the 720p dvr DS-7104HGHI. It works perfectly, although it is 720p and the cameras 1080p 2MP.
Thanks in advance
-
Yes, it is all compatible. The cameras are HD TVI hikvision 4.0 and the dvr is hikvision compatible...
I think the same with the cable. The image quality is perfect but I don't know what to do...
-
May that cable be causing that problems? I should replace it for utp cable and baluns?
Previously, that cable was used by a generic ahd dvr.
-
Hi, thanks for answer.
I've checked the sequence mode and it is disabled.
But if it were enabled, the dvr will switch between cameras at the same seconds. I mean, every X seconds, the dvr will switch the camera.
In this case, the sequence mode it is disabled and the message appears randomly along the day.
I attached an image of the cable. It is prearmed.
-
Hello everyone.
I write to you because I have a problem with a DVR that I installed.
Sorry for my bad english.
Previously the client had a system with 4 generic cameras working correctly from a kit.
I only changed the cameras and the DVR leaving the armed cable that they already had in place. (cable is without baluns)
The DVR is a DS-7208HQHI-F1
The problem is: randomly shows a sign with the title Attention and with the message "The channel does not exist" and the OK button. He does it several times a day.
In addition, the live view is changed to a single camera, usually to channel 8. That is, we are seeing 2x2 cameras from 1 to 4, and suddenly it is only passed to channel 8 in full screen. And since the DVR has only 4 cameras connected, there is NO VIDEO in full screen.
I took it to the warranty and I left the customer a DS 7104HGHI. Result: in the guarantee the DVR says that it works perfect, and the 7104 the client does not present that problem.
Confused with this episode, I left the client a new DS-7208HQHI-K1 but WHEN CONNECTING IT PRESENTS THE SAME PROBLEM.
Can it be the old cable that is causing this inconvenience?
Thank you for reading.
I attach an image of the message that is shown every time.
Hikvision - the channel does not exist
in Security Cameras
Posted
I have changed the cable. I have installed a new FTP cable with baluns and a power supply per camera. The message is still appearing.
Does anybody have an idea ?
thanks