SirUli
-
Content Count
3 -
Joined
-
Last visited
Posts posted by SirUli
-
-
3 hours ago, riogrande75 said:http://<ip>/cgi-bin/snapshot.cgi? [channel=<channelNo>]
Exactly this url (i used http://admin:password@hostname/cgi-bin/snapshot.cgi) gives me a picture BUT (and that is why i don't use it) it takes ages to get the picture back and thus has a high delay. Therefore i'm using a solution like riogrande75 but with a daemon that runs continuously and writes every couple seconds the image to a ramdisk. Through that i have the "current" picture available for anything you can imagine, e.g. Telegram or Fritz!Fon
21 hours ago, rickwookie said:In the Room Number Management, do I need to include the #0 after the extension/group number that I want to add (as 9901 has it listed as 9901#0)?
Btw, I didn't even know that the DEE1010B was a thing! Can you cascade them on the RS485 bus to get more than one extra channel (channel 3, 4, 5, etc.)?
You don't have to include the #0, i just have 101, 102 etc as room names. And DEE1010B is only possible to be available once on the RS485 bus to my knowledge.
-
Enable the internal SIP Server again, then make the room configuration and disable it again - seems to be a UI issue.
Regarding the HTTP command for unlocking:
- Primary Unlock (in the VTO2000A): http://admin:password@doorbell/cgi-bin/accessControl.cgi?action=openDoor&channel=1&UserID=101&Type=Remote
- Secondary Unlock (the DEE1010B): http://admin:password@doorbell/cgi-bin/accessControl.cgi?action=openDoor&channel=2&UserID=101&Type=Remote
Cheers,
Uli
Dahua VTO2000A, SIP Firmware and Asterisk
in Installation Help and Accessories
Posted
Cheers,
Uli