Jump to content

jcfigueroav

Members
 View Profile  See their activity

  • Content Count

    4

  • Joined

  • Last visited

Community Reputation

0 Neutral

Converted

  1. jcfigueroav started following AVTECH 761, cannot access over the internet, PLEASE HELP!!!
  2. jcfigueroav
    Thank you very much to all of you! It's my first experience in a forum (believe it or not). It was great! Scorpion, those links are awesome material! Thank you, they answered most of my questions. I'll be asking for help again ... for sure ...
  3. jcfigueroav
    After many hours pulling my hair I can see my DVR on my LAN using the dyndns account. Video Server E pulls my IP address in the screen when it connects. Now ... am I online? Could anybody check? ... please ... connectswfl (dot) dyndns (dot) org guest guest Thank you!
  4. jcfigueroav
    Thanks for taking the time to answer. DVR settings were default IP = 198.162.1.10 Gateway = 198.162.1.1 Subnet Mask = 255.255.255.0 after I changed Static for DHCP, settings changed to IP = 198.162.1.101 Gateway = 198.162.1.1 Subnet Mask = 255.255.255.0 I can still access my DVR in LAN using 192.168.1.101 even with Video Server E, but I cannot access it over the internet. In the other hand, when I use the remote control to see the settings directly from the DVR, the settings are different than the ones I can see thru Video Server, Video Server shows IP = 198.162.1.10 Gateway = 198.162.1.65 Subnet Mask = 255.255.255.0 I tried to change them but I can't.
  5. jcfigueroav
    First time user. AVTECH 761, camera 1 installed. Router = LINKSYS WRT54G (just Plugged and Played) Internet Access = CABLE MODEM/COMCAST DynDNS account already setup = connectswfl (dot) dyndns (dot) org DVR settings = default (starting point) I was able to access the DVR thru the LAN with 192.168.1.10 then when I started to setup DHCP in the DVR, once I changed from Static to DHCP in System Config/Network/IP Type using AP software, AP software lost connection and I was not able to log back in. I checked the DVR under Menu/Advanced/Network/DHCP and the IP changed to 192.168.1.101 I tried it and it worked. I enabled and added the DDNS information under System Config/Network/DDNS. I tried to access the DVR using the domain, it didn't work. If I use 192.168.1.101 I'm still able to access the DVR. By the way, the DVR shows IP = 192.168.1.101 and Gateway = 192.168.1.1 but AP software shows Server IP = 192.168.1.10 and Gateway = 192.168.1.65 I guess I'm missing steps, I'd appreciate any help.
×