Jump to content

Paulski

Members
 View Profile  See their activity

  • Content Count

    4

  • Joined

  • Last visited

Posts posted by Paulski

  2. Posted

    No the computer is only being used for the one task.

    that was my thought to buy a cheap 4-1 DVR, use the OSD to change the camera setting from HD-CVI to CVI using the DVR and then unplug the cameras from the DVR and back into the computer.

    will any 4-1 DVR work or do I need to look for something specific?

    thanks!

    paul

     

  3. Posted

    It is a capture card with a connector that allows for 4 BNC inputs. I am not sure on the make but the entire computer is a proprietary build so I don´t want to change it. The software doesn´t support HD video so I can´t go that route anyways.

    I have attached the spec sheet on the cameras I have (I had to reduce the quality of the file to allow it to be uploaded)

    Thanks

    CAM-IC9715-A-Z-IRE (small).pdf

  4. Posted

    Hi,

    i am using 3 HD-CVI bullet cameras for a non security purpose. They are connected with RG59 coax cables to a computer with 3 separate feeds.

    The cameras support 4 different modes but I can’t figure out how to change the cameras modes. The signal going into the computer has to be SD and I need all three signals all the time. 
     

    i purchased a UTC 820 camera controller but I can’t get it to change the camera output.

    i am wondering if I can access the camera OSD using a DVR, change the mode and then plug it into the computer?

    any other suggestions?

     

     

×