John-tech

Hi 
we have lost the details for the remote app , so sadly have no access , we have tried connecting a pc monitor and a HD tv to both the HDMI and the vga connectors .

your offer to help is greatly appreciated , I”ll PM you my contact details .

John 

Hi

ok , so if it’s a Dahua , maybe good news ?

the system powers on , there are green lights illuminated against every Hard Disk ( 16 in total ) the internal fans are running , the power button is illuminated ( blue led ) , but there is a right light led against the warning triangle on the front . 
 

there are approx 48 IP cameras attached to a powered  switch , all of which are showing network connections , the switch is connected to the NVR .

I have plugged in a monitor to every HDMI port and also the VGA port and am unable to get a signal .

System is installed in Rugby , West Midlands . England .

Edit

Photo attached of the front screen , the display says “No Sync” 

Hi Tom

thanks for the feedback , there is no label on the NVR to ascertain the model number , so I guessed that it was an Storm by what the NVR looks like , I can’t access the UI , so I can’t verify it from the software , so you could well be correct that my NVR is a rebadged Dahua 

I’ve attached a couple of photos of it front and rear , perhaps it can be identified from these photos ?

If it is a Dahua , same question , is anyone willing to have a look at it to see if it can be brought back to life ?

john

Hi

I'm told that UK IC Realtime don't use the Dahua units ( I know in the US they do) , I take your point on the repair , however the NVR

cost over  8000 GBP  , so I'm reluctant to just throw it in the bin without even trying to get it looked at.

As per my original post its the STORM-1s-16128 

IC-Realtime-STORM-1s-16128.pdf (icrealtime.ie)

John

Hi

I currently have an IC Realtime NVR from the UK , model STORM-1s-16128 , which is no longer outputting any video , the NVR is powered up and HDD lights flashing 

I have contacted IC Realtime in the UK to see if they will look at it and repair it , however they are saying that as its over 10 years old they will not accept it back , does anyone out

there know anyone that is willing to take a look and see if they can fix it ?

Thanks

John