shawn305

any helpful hint to get this going?

hey everyone i have a few adt pulse camera that i would like to setup around the house. The camera's are installed and were hooked up to adt pulse system. i canceled the service. i was just wondering if i can setup to view and record on my home pc and view it with my smart phone. the camera's i have are RC8025b-ADT, OC810-ADT. The wireless router that it is hooked up to is a ADT pulse gateway model # PGZNG1. If anyone knows how i can get this working can you please let me know? Thanks Shawn305

welcome to the forum

Hi everyone i have not been on the site for a while, just been busy. I have a problem with my Intellex system, when i start it up it is giving me adisk i/o error replace the disk and press any key. i did some reading and i could have a bad hard drive or a hard drive that is not working. i was just wondering if i replace the hard drive how do i get the software to load back to make the system work? and how do i load the software on the hard drive? i have a Intellex DVMS DV16000. thanks for your help Shawn305

thanks for your advise

hey everyone i know this is an old post but i have this unit sitting in my basement collecting dust and i want to get it set back up... do you think it is worth it to buy the replacement hard drive for this unit or should i just cut my loss and but a new complete system for my home? i know i had asked this question earlier in the post but i will ask it again just in case anything changed. can i access the software to install on a new hard drive? can i use any hard drive, plug it in and load the software? Thanks Shawn

ok with that said i can just replace the hd and it will do it's thing and work again? i was told that the system is an older system and the software is in the hard drive and if i want to fix the problem then i have to purchase a new hard drive for the unit and all i have to do is plug it in and that is it? the hd number i got was 0710-0014-0102. i hope that could help you help me.... thanks guys

i just spoke to tech support and they do not have the software for it, they gave me the part number to buy the hard drive with the software already on it.. is there any other way? i have a hard drive to replace that one.

thanks for the reply i will try that and post me results

hey everyone i just got this dvr to run some camera's for my home, when i first got it a guy that new about thease machines gave a brisf run down about it but i still have a few questions. He gave me the installers password but i cannot find the paper i wrote it on ( dam ) so down anyone know what that is ? the reason why i need it last time was that i had to upgrade the system software to get some functions to work and that is the only way you can log out of the program amd still have windows running. Does anyone know what it is? second i know the unit is old but i think it would be ok for what i am using it for i was just wondering the software version i have is 2.5.9. is there a newer version of is that it? Third question is if i leave this machine connected to the internet can i acess this machine from another computer and view my camera's ? Well that all i can think about rite now, Thanks For the help in advance.

hey everyone, i have a Intellex DVMS DV16000 and i have some footage on there that i need to save onto a disk or usb. Well i just need to get it off my machine and save it to my home pc. the unit that i have does not have a cdrw drive it only had a floopy drive, but it has 4 usb ports at the back. can someone help me determine what i need or how to transfer my video. i was reading somewhere that my system will only use a certine brand of crdw drive or it will not work, and i cannot find that info again to see if i can even get that drive because i know my unit is old. thanks for all your help

Hey everyone, how is everyone doing... been here for a few years now and got to say what a great place it is. So much helpful info and people. I have some dome camera's that i want to install outside my house (about 6 or 8 of them). My home normal rectangle house with a 2 car garage that is attached to the house but sticks out the front of the house. The front walkway goes along the side of the garage to get to the front door, it has a walkout basement with a patio over the basment door enterance, with another door for the upstairs door. anymore info need let me know Here is my question(s) 1. how high do i mount the camera's? 2. the wires for the camera's do i run them in plastic pvc pipe's? Anyother info that you would think will help me will be great Thanks Shawn305 Sorry for the bad drawings only had paint at work it is the top and side view of the house

Thanks guys for a great dicussion and shared opinions...

hey everyone i am new to this world and just need some help with this dv system my friend len't me to use until i get my own... I was interested in putting up a security system at my home so i got the dome ir camers and just was playing around with the pc software so i know how to use it gefore ido the final setup. The program is intellex 2.21 software.. i have one camer hooked up to it for testing.. when the system starts it shows what it viewed on the camera, the recoed button is light, looks like it is working, but how do i view what is recorded? i tryed setting alarms, the icon flash's on the bottom left, when i click on the alarm button there is nothing there.. i am stuck.. Any help would be great,, Thanks shawn305

thanks again tip_ex for the help. do you know what type of cd burner i can install on this unit? is it easy to install

To export a clip, in your situation, you have 2 options. 1 - Install Network Client on a computer. 2 - If the unit has USB connection, get a USB flashdrive that has WIN98 drivers (2Gig and less, 1 Gig is better), that you will install from the floppy disk drive (if its still working), or through network connection. i will try option 2 and seee how that goes. for option 1 do i get this program from the intellex site ? and where do i install it ? on the dvr or on my home pc? How do you get the recoerded info through network connection? This will require you to have a server. If you do not have one, you can use your machine to act as a server. well i do not have a server and i do not know how to make the dvr act as a server... I will need further help on that. I don't think the height is in the way here. Depending on the cables you're going to use tough. It's more about what you see as picture from the camera. well i am going to use the coper rg58. i noticed somthing the other day when i view 4 camera setup on the screen the picture is clear but when i switch to singal camera then it gets slotchy, you can see the pixels. do you think that i need to update the drivers for the moniter? if you want to connect the Intellex to your TV, you have several options, but it will require you to have a BNC to RCA adapter from Radio Shack. there is no other way? ho do they do it at apartment buildings where you can see the front door csmera on one of the higher channels with your tv cable.

Thanks Tip_ex for the info. where do i get browser client? and do i have to have my own server for this to work?, or what server do i use? Another question is i decided to install the camera's myself on my house, any helpful hints, tricks, of info that would help me put? How high from gound level should the camera's be? my camera's are pritty basic nothing fancy ( dome style ). With the intellex unit i have how do i hook it up to my television cable to see the camera or camers's ? i had the system running with one camers hooked up to i, well someone hit my car at the front of the house and the unit captured the footage. How do i export the image, to a usb or cd, dvd,etc. This unit does not have no cd drive in it, only a floppy drive. what type of drive can i install if needed and how do i set it up to work with the unit? Thanks Again Shawn305

with the system i have, what is them latest firmware i can get without upgrading the license? is there a guide that will show me how to acess the unit via another pc with the internet?

well i don't know if this will help but here is the number on the bottom D6C80A1EA-22... i read isome more about this and wondering if my unit would work with the add on software on the intellex site

just wondering if there is any info from the forum readers about my questions? Any help would be great. Thanks

what is the software version on your system?

there are so may updates listed on the link RickA posted what update do i use? i am not shure what one is the rite one for my unit? do i install one at a time until i get to the most recent of do i pick the most recent and update that one? The system is running windows 98 se. Well i spent allot of todat googleing about the unit and reading all different articles about it, in the upgrade screen i tells me that the version is 2.5. my current software version it 2.5.9.. with version 2.5 does that mean that i cannot upgrade to version 3.0? i am pritty shure all the articles said that version 2.4 can be upgraded to 3.0 which changes winodws se to windows 2000.. i am lost with what update this unit should be at, i would like to have the most current firmware on it so i and optomise all the feature's but i am still unshure about a few things.. with all the reading i did i still do not know if i can acess this machine from another pc, i did not find any info about it.. i hope someone could help me with that.. Thanks again

Thanks RickA i will give it a try this weekend. i do think my unit is legit because when i frist got it last year some functions were not working and the person that gave me that password told me to update the unit, so i did it without any problems with license. i am not shure if it will be the same with the newer updates.. thats how i knew about the password thing. Thanks i will keep this thread updated.

thanks for the reply i was check this everyday but finaly you replyed the board is intel D815EEA2 / D815EPEA2 With that info i guess you can tell me what what software version i should get or where i can download it. As for the password could you pm me of i can give you my email and maybe we could go through that? Or could you tell me what the first 2 or 3 digits it starts with? i am trying to look for the paper i wrote it on, an that would help. Lastly to acces the unit for another pc do i need any special software ? Or how do i do that? Thanks again for your help

Hey my name is shawn305, was looking for someware to help me with my security system, And a frien referred me here... looks great.