LiThiuM

ok heres the spec then the problem OS: Xp pro Video card : Ati 1550x Dvr card : Kodicom 4400 MBoard: Asus I run diginet I see the image BUT the image is set still, if i double click on the image it refresh. The thing that IF I go into the diginet motion dector setting, the image is fluid and actualy display in real time what its happening. Tried on two pc and had the same problem on both, the card is good cause we then tried the card on a ubuntu system with another webbased php software and its was #1. If anyone have any idea you are welcome to tried to help ty

Isn't your DVR supose to have a Ethernet connection directly in it ? If you DVR is PC based you should add a network card on it. If you want to know what Brand of router is the best? look over Linksys / D-Link they have very stable and good router maybe you'll have to do firmware upgrades and they are very easy to use. If you use a router you must be aware that you will have to Forward some port in your router configuration. If you want to know how to do so you should check out your the router brand website they should have tutorial how to do it. I Hope i didn't miss you point on your question.

This RG59 to cat5r is really confusing to me too... i Was looking for Ethernet cable on the internet some peoples says that you cannot run it over 364' (100m). And i was checking on some Baluns on a website (can't post link cause I'm on my first pot :S ) and they say 2000ft ?? So im kind of confused. They have a video explaning How to setup your Baluns for what i could understand if you have you Power next to your cam already you are only limited by the "booster" (aka baluns) and if you run a baluns with Power on it you are limited by the % lost trought you power lost ?