badeffect10

That worked. I appreciate it harrar!!

I appreciate the reply. I'll give it a shot when I get home. I looked under everything else except the audio settings.

Good evening all. I have a GV-650-8 system running V8.3.2. I have all 8 camera being used with full screen on motion detect enabled. I would like to use the 9 camera screen division setting for viewing all 8 cameras the same size with the 9th camera being the geovision logo. I can select the 9 camera view but as soon as a camera pops up full screen with motion detect, it defaults back to the 8 camera display with one of the cameras taking up most of the display and the other 8 much small. Is there a way I can make the 9 camera screen default with motion detect. Thanks for the help.

Well, it's somewhat comforting to hear that it may not be a camera and chip issue. I appreciate the advice. Yes, I have tried different cameras from different mfgs. It now appears that 2 of the screens have cleared up yet one still has the rolling I described in both multi and fullscreen mode. What's even more odd, it seems to jump from one screen to another now. I left to go out of town on Sunday with the problem on screen/cam 3 and came back it was on screen/cam 2. I haven't done much recording yet since we mainly use it for visual monitoring only. I'm wondering now if it could be a video card issue?

Yes, I tried a couple of different cameras, both black and white and color as well as a pattern generator I have. I'm using Belden 1694 cable which is a broadcast quality 75ohm cable.

Thank you for the above advice but that did not correct my problem. The interlace problem reportedly only appears in fullscreen mode, I'm seeing the problems both full screen and multiscreen. My black and white cameras are showing up with RGB pixelation on my monitor. I see that a geovision rep appears on the forum from time to time, any solid answers as to what they are going to do about the problem? I just dropped $300 on a card that looks like crap when I hook my cameras up to it.

Good evening all. I've been reading through the last couple months of posts about problems with the 600,650, and 800 cards in regards to video quality. I'm pretty sure I have one of the problems described but wanted to get some clarification. I'm using Speco CVC-130r BW cameras in a shuttle XPC. Pentium Dual-Core E2180 1 gig ram Intel 945 GC motherboard PNY Nvidia Quadro 256meg Speco BW CVC-130r- from what I understand these have the Sony Super HAD sensors GV 650 ver 4 release 8.2 So when everything is up and running, I have what look like scan lines about 3cm apart rolling from the bottom left to top right of the screen very fast. The pictures also appear blurry on an LCD monitor via DVI. I realize I take a quality hit going from the analog domain to the digital one so I expect a small hit but this one is quite extreme. I checked all the cameras on an analog TV and they look fine there. So my questions. Does this sound like chipset/camera problem that has been occurring with certain cameras and the 650's. I just bought the card a few months ago so can I send it back for a different mfg? Is geovision going to address this problem? Replace the cards if they can't fix it via firmware. Thanks for all the help ETA: Forgot to add, got the motion sensing application setup but due to the scan lines not matter what level of sensitivity I set it to I get constant email alerts when there is no action occurring.