Jump to content

keefe007

Members
 View Profile  See their activity

  • Content Count

    73

  • Joined

  • Last visited

Posts posted by keefe007

  1. Posted

    Elk also has a ethernet expander with integrated webserver, it's a whole lot of alarm though.

     

    I did check out the ELK and it does seem good. The web interface could really use some work in my opinion. It doesn't really compare to the Visconic, but I think the features are there. I wish the Elk wasn't java though. I'm going to look more into the ELK system. Cost-wise it doesn't seem like it'd be too much more expensive than the Visconic. I guess the main things I dont like about the Visconic is that it only allows for 2 hard-wired sensors and there's no traditional panel. The "panel" is integrated with a keypad and it just doesn't seem too commercial.

  3. Posted

    I'm looking to install an IP enabled alarm system at my office. The main feature I want is the ability to connect up over the network/internet and managed the system. I'd also like to be able to receive email alerts when the alarm is tripped. From what I can see, not too many alarm panels are IP enabled. The only one I've found so far is the Visconic wireless system. What other systems are out there? This can be wired or wireless.

     

    Thanks,

     

    Keefe

  5. Posted

    I'm running Win XP Pro SP2 with Geovision 7.0.5 with a GV800v3 card. Whenever the program starts I get this error:

     

    Runtime Error!

     

    Program: C:\GV800\GV800.exe

     

    abnormal program termination

     

    I've tried uninstalling and reinstalling many file. When I uninstall I also delete the GV800 folder, all geo* files on the system and all GV* files on the system.

     

    Any suggestions?

  13. Posted

    All I can say is finally! With this new feature set in place, I will have more confidence than ever in selling Geovision solutions.

     

    v7.1 is expected to be ready in Q4, 2005

     

     

    MPEG4 (ASP) & H.264 Video Codec: ---New

     

    Two new video compression codecs are added. One of them is Geo MPEG4 Advanced Simple Profile, following industry's standard (MPEG-4 Part2). The other one is Geo H.264 using compression technique defined in MPEG-4 Part10, delivering crip, clear video in much smaller files. For example, if GeoMPEG 4 can record one month, then MPEG 4 ASP can record 1.2~1.5 month and H.264 can record up to 3 months.

     

     

    Video Mask Protection: ---New

     

    This new video mask filter is used to hidet sensible area for live viewing and by using RSA encryption password-protection for later retrievable. For example, during the usage of ATM Keypad to withdraw cash from ATM machine, user's ID/Password can be hide from security people's viewing but can be retrieved later as needed with password.

     

     

    Advanced Motion Detection: ---New

     

    This new feature is used to set sensibility of motion detection for predefined areas. Each region can be customized with different level of sensibility. For example,

     

     

    Scene Change Detection: ---New

     

    It can detect malfunction, obstruction or tampering of the camera, by change of the view angle, scene, or focus clearness. For example, when crime is commited, criminal can change camera's position to avoid their behavior is recorded. This new feature can help security guard to responde right away after getting alert.

     

     

     

     

    Control Center: ---New

     

    It is a centralize management application to manage all DVR system's setting, view all video's archives and control their I/O everything remotely from one single terminal station. For example, when one DVR detects fire in a building, operator can trigger rest of DVRs' alarm from one click as well as opening all DVRs' outputs (like doors) for people to exit.

     

     

     

    Codec Storage Calculator: ---New

     

    This new tool is used to analyze and calculate the precise storage requirement for your DVR's application and the test result is based on your actural PC configuration.

     

     

     

    PTZ Profile Utility: ---New

     

    This new utility helps you to create new PTZ Dome's configuration file (.ini) to be used in combination of your DVR system. For example, when requesting GeoVision to support new dome, you only need to give us protocol document instead of sending us dome.

     

     

     

    Swap HDD Utility: ---New

     

    Upon insertion of an external storage (like USB, Firewire or Serial ATA), your DVR recording storage capacity is added automatically without turning off. The recording path is added automatically and Viewlog can also be transferred for later view on other PC. For example, when HDD#1 is almost fulled, you can immediately insert HDD# 2 for continuous recording without turning off DVR to loose video data.

     

     

     

    New Profile Management: ---New

     

    Fast Backup & Restore Manager is the new application that lets you use your custom skin for your DVR System. You can customize your favorite DVR's applications and export all the settings to make additional duplication.

     

     

     

    Spot Monitor: ---New

     

    It can export selected video channels and display layout for DSP controller's TV-Output. For example, if camera#1 is confidential, then you can only output camera 2~16 to TV monitor.

     

     

     

    Audio Playback in Smart Search: --Improvement

     

    Smart Search in Viewlog application now supports audio playback

     

     

     

    500 Subscribers Support in Center V2: --Improvement

     

    The central monitoring application, Center V2 now supports 500 subscribers

     

     

     

    UPnP NAT, Webcam Remote Control: --Improvement

     

    Using revolutionary Universal Plug and Play feature, all the required TCP/IP ports are configured automatically and the new webcam remote control can be resized, video attributes like Hue, Brightness, Saturation or Contrast are adjustable. DVR recording start/stop, schedule recording start/stop can be remotely controlled through Web interface.

     

     

     

    POS Live viewer: --Improvement

     

    Now it supports multiples POS transaction's Live View on one screen. Each window can be group together or divided into single. The list of transaction's items and text attribute can be customized as well.

     

     

     

    New Schedule Planner Management: --Improvement

     

    The new schedule planner is now easier to configure (in 2 steps using Setup Wizard), timeline control using Drag & Drop and all the settings can be exported to an XML file for later implementation.

     

     

     

    Introduction of New Hardware

     

     

     

     

    GV-MP4: Real-time MPEG4 hardware compression You may choose to purchase GV-MP4 cards in addition to your GV-system. Each GV-MP4 cards (MPEG4 hardware compression card) gives 4 video and audio channels recording at resolution 720x480 (NTSC) or 720X576 (PAL) with low CPU usage.

     

    GV-Data Capture V2E (with Ethernet Port) The new POS companion has an additional Ethernet port for LAN connection and the old parallel port is replaced with RS232 DB-25 (Male Connector).

  21. Posted

    Quick raid primer for Rory:

     

    Raid 0: Usually called stripping. Has great speed, zero redunancy. Usually used for two drives. Some raid controllers call this JBOD (Just a Bunch Of Disks)

     

    Raid 1: Mirroring. One drive is copied to another in real time.

     

    Raid 0 + 1: Stripping and mirroring. Very fast way of redunancy for two drives.

     

    Raid 5: One drive out of a set is used for checksum data/redunancy info. 4x250 gb gets you 750 GB of drive space. 6x250 GB gets you 1250 GB. 5x400 gets you 1600 GB, etc.

     

    Those are the three most common forms of raid.

     

    Correction: A part of EVERY drive in the array is used for parity (data redundancy). The amount of total space consumed by parity will equal the size of one drive. The formula for calculating is (N-1)*S where N = the number of drives and S = the size.

×