GhostRider

There is a mini nvr 2 for sale on ebay UK

http://rover.ebay.com/rover/1/710-53481-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=264897139755&ipn=psmain&icep_vectorid=229508&kwid=902099&mtid=824&kw=lg&toolid=11111

A: just open the ports on your router and connect direct.

B: no firmware updates as far as i know.

Hi, does anyone knownif the hiwatch nvr-108-a nvr can record rtsp feeds from 3rd party cameras or is it onvif only?

I have come accross this problem too and I have had 2 avn701 cameras bricked, after some research I found there is an unpatched vulnerability called imeiji

https://www.bleepingcomputer.com/news/security/new-imeij-iot-malware-targets-avtech-equipment/

Does anyone know the DC plug size for Avtech AVN ip cameras such as the avn812 and avn801?

Goolink is the app to use

Anyone run their nvr on a 1amp power supply?

I have always used a 2.1amp on my nvr 1 and nv2 but I just tested the current draw and it's only around 650-800ma?

As far as im aware they have always had this feature, I have nvr1 and nvr2 and they both overwrite

The hardware is different internally so you cant change from 2-5mp etc

not disappeared, mate, just have been bloody busy after 3 weeks Chinese New Year Holiday, Everyone in Factory is crazily busy and I think we still need another month to get everything back to normal.

 

By the way, how many of you guys still have the dead NVR, USB Port not working (usually caused by updating the wrong firmware or updating with wrong methods or sometimes other reasons)

 

Follow me here to solve it on your own. Requires a little bit soldering knowledge and it must be done very carefully.

 

remove the chip in the red circle.

What do we do after removing the chip?

Have you tried changing the screen layout to 4,6 or 8 box view?

How can i see what resolution and mp each camera is?

Redders you need to use an app called Goolink

I get the same problem with 1 of my 720p cameras, from sunrise to sunsets its on/off every few minutes then at night it works fine

You can use a usb wifi adapter but it only supports WEP encryption which is old technology, so unless you have wep you will need to use an ethernet cable

Aslong as it detects your hard drive it wil record fine 24/7

Did you find a solution to this problem? I have the same on my mini nvr

Yes I wish to see 8ch on same screen, are all your cameras the same?

From what I understand if you have mixed resolutions then you can only view 4/8 instead of 8/16

Its standard Esata not p

Hi Guys!

 

Does the mininvr has eSATAp or eSATA port? I am not sure which cable would be the best - as you wrote, esata hdd connection would provide better stability than the usb one.

 

Thanks!

 

Have you tried changing to 4 camera or 8 camera view?

I have the same problem on bith my nvr 1 and nvr2 8ch, unless i change to 4 cam view i cant view live streams

Hi, I have just received a Mini NVR 2 (16 channel) and I am trying to add my 9 IP cameras (IPCC-B12N). I add the RTSP links for each camera (rtsp://:/11) for the main stream but the window for the camera turns black with a flashing exclamation mark at the bottom. If I double click the window the video shows up in the large single video. If I add the sub stream (rtsp://:/12) they show up no problem. Ive tried adding them as onvif but the same applies as the above. Firstly does anyone know what the flashing exclamation mark means and does anybody know how to combat this problem. my old escam 8 channel Mini NVR had no problem showing the video with either the main or sub stream.

 

Thanks

My New Mini NVR 2 arrived today !

you can have it how you want, all blue is recording 24/7 yellow is motion, have it all yellow if you want motion only

I made a video showing how to do the correct settings schedule and motion mixed

try to format it on your pc and delete any paritions and try again also try another usb cable

nope, no network connection not even dorect connection to pc. just red power light