Kodicom KMC4400R from 4 channel to 8 channel using 2 card.

[nadimsia 0]

I just already buy the card and working good. And i found something interesting about the card, if we want 8 channel real-time monitor, just put another 4400R card.

 

But the problem, there is no document show how it work or what should we do to get the 8 channel with 2 card.

 

Any information from your guys.

 

Please refer to this website that show what i mean sz-dvr dot com / kmc-4400r.htm

 

Thank you.

[crirvine 0]

The distributor you bought the card from should send you an installer manual with the cards you buy. Your best option is to call your distributor

that you got the cards from.

[DeejayJrm 0]

its easy first thing you do is uninstall dvrnet/diginet software then erase dvnet folder in drive c: to erase your old config files in software

plug your 2 KMC4400R in seperated pci slot install drivers then choose 8 channel when channel option pop-ups then check your camera setting in setup option check 1 to 8 camera in camera setting and set the camera division in camera division option. Hope its helps...