Jump to content
maximusbraveheart

PTZ panning above horizon 90 degrees

Recommended Posts

One thing I noticed on my new install PTZ cam is that you cannot zoom in on the horizon. From wide angle to zoom, it goes to somewhat below the original center of the screen. It is mounted at about 20' elevation and the road out front 150' away is at about 10' elevation. So it is at least 10' above the road. Before you could not zoom in on cars but now I shimmed the wall mount so it tips the bottom up some. You can zoom to a car height but you cannot lookup to say yards further out.

 

There may be a way to also shim the camera itself in the mount so it tilts up some so you can zoom farther out.

 

I liked the other thread about mounting one sideways... M-B

Share this post


Link to post
Share on other sites

Hi,

 

Yes, I have shimmed the actual camera housing up ever so slightly in the mount to achieve horizon and above viewing. Had an exact application and the customer said, "hey, why can't I see the horizon"? I said I would be right back, made the modification, and now my customer can see the horizon 360 degrees. I used a sliver of a match book cover. In no way affected the operation of the cam otherwise.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×