DanKiely 0 Posted August 29, 2008 Hello I run a sensormatic system at my business with a nine channel sensormatic multiplexer. I have several speed domes which connect to a j-box that connects to an EIM box to my ADTTE controller. The EIM also runs to my multiplexer. I recently purchased a sixteen channel Robot multiplexer. It has the remote input on the back. Will this work with my system if I substitute it for the 9 channel sensormatic one? Share this post Link to post Share on other sites
CCTV_Suppliers 0 Posted August 29, 2008 You are fine... I do not think you will see much of any difference in performance, as you probably are using ADTT16E touchtracker, which is directly connected to your domes... unless.. if it is being routed through the multiplexer... very rare, but possible... Let us know... Share this post Link to post Share on other sites
DanKiely 0 Posted August 29, 2008 thanks! another question, I recently purchased a second EIM box and touch tracker and read up on how to hook this up as a secondary controller. The back of the multiplexer has a main monitor output and a call monitor output. will the main output show a multiplex view and the call up respond to the camera selection? Share this post Link to post Share on other sites
CCTV_Suppliers 0 Posted August 29, 2008 It should if the wiring is done correctly.. Just check the manual and it covers all the basis.. Share this post Link to post Share on other sites
