dcam 0 Posted January 30, 2009 I have a client who has 3x DVR's in 3x locations, and he cannot log into Multiview, He has 2x laptops running vista, and each of them have identical problems. When he opens the browser and gets to the point where you chose multiview,and press ok, it goes straight to "connect to server" and just sits there. It should ask for a user name + password, but it doesn't . He can access single view + remote view, and otherwise everything works perfectly. I can log on to multiview on any XP computer using his user name + pass. I haven't tried on another vista computer yet. As I don't use vista, I am not sure if there is some firewall or anti virus setting that is interfering with it If He launches multiview from the installed program , press "edit" and enters the ip address, and goes from there , everything works fine I have tried un installing and re installing the program but to no avail. Any ideas vista users Share this post Link to post Share on other sites
olafak 0 Posted January 30, 2009 I am not sure on this, but maybe this will help: I had to open IE by right clinking on the short cut and selecting open as administrator from the dropdown menu. That seemed to allow me to do everything I needed. Share this post Link to post Share on other sites
