dvrtiger 0 Posted May 7, 2009 Hi, I have a problem with Intellex 3.1 Standard. I've got it into service shop with failed hard drive. I've replaced it, but I'm unable to start recovery process. I always get message 'Invalid destination drive' in the ghost window. I've tried several hard drives, all new from box ( several ATA, and also SATA with and without SATA/ATA converter) but without results. I've also tried another cd recovery set. I have to mention that all other component were tested (using diagnostic software, on another unit and with linux live distribution on that particular unit) and showed ok. BIOS was updatetd with the latest version for D865GBF motherboard. If someone could help me, I would appreciate it. Thanks in advance! Share this post Link to post Share on other sites
CCTV_Suppliers 0 Posted May 7, 2009 Before you restore your system, you have to partition your new drive with 8GB storage and make sure it is set active... and the rest of the process is covered in the above url... Any other questions, let us know. Share this post Link to post Share on other sites
dvrtiger 0 Posted May 7, 2009 Oh, I didn't know that...thanks a lot, I'll give it a try in the morning Share this post Link to post Share on other sites
dvrtiger 0 Posted May 8, 2009 Your advice worked well, thanks! Share this post Link to post Share on other sites