RichTJ99 0 Posted December 20, 2009 Hi, I am playing with a 1480 card as an upgrade from a very very old GV900. My main reason for upgrading was the BB, Iphone, & better WM6 support with Gview_v2. I had a 800 card but it was apparently faulty so I bit the bullet & spluged on a new card. Anyway, I was reading about D1 video support. Which Codec setting is this in Geovision? Thanks, Rich Share this post Link to post Share on other sites
trol4o 0 Posted January 25, 2010 You should go to Video Source menu and choose 720x576 Deinterlaced resolution. Afterwards you should change the recording quality, which is done individually for each camera. Share this post Link to post Share on other sites
rory 0 Posted January 25, 2010 D1 has always been 720x480 (NTSC) in Geovision (Not sure about Pal) I would still use 640x480 Deinterlaced myself, the size comparison between the 2 recorded files could be an 80% increase to 720x480 without any major increase in video quality. Share this post Link to post Share on other sites
