simo923 0 Posted May 2, 2010 Hi Guys. My servers are running XP with 2 x GV2008 cards in each. I have workstations viewing the servers, they are running control center 8.3. I have Matrix showing all of the cameras, and E-Map showing a map with the cameras on. I had created an Emap locally on the workstations, and running it through Remote E-Map on control center. All working good. E-Map Editor allowed me to rename the cameras without any issues and plot them onto the map. I then had to change passwords on the servers, so just changed the admin password. Of course, did the same on the control center as well, as they are logging in with the admin credentials. All of a sudden, my working Emap no longer shows any cameras, so i'm guessing its not able to log in. If i try to create a new emap, i can log into the servers with Remote E-Map and it will allow me to plot the cams onto the map, but the rename function is ghosted out. Any ideas? Do i need to run E-Map servers on the servers or carry on standalone? Share this post Link to post Share on other sites
