NETVOYAGER 0 Posted June 6, 2011 Hi all I have three ptz cams and two do not follow the presets at night one works fine at night and day the other two have a mind of their own at night ok during the day I have local power to each cam any ideas please Share this post Link to post Share on other sites
tomcctv 187 Posted June 7, 2011 Hi all I have three ptz cams and two do not follow the presets at night one works fine at night and day the other two have a mind of their own at night ok during the day I have local power to each cam any ideas please hi are these new or secondhand. you may need to reset your controller and then re-enter your tours. controller may still of had some old tours on time select Share this post Link to post Share on other sites
rocmay 0 Posted June 8, 2011 Type Camera's and joystick type might help. Could be anything with this post. Share this post Link to post Share on other sites
NETVOYAGER 0 Posted June 8, 2011 NO JOY STICK USING RS485 TO PTZ CAMS WITH THIS SERVER 4CH Real time IP Video server H.264 with Audio HAVE RESET SERVER STILL NOT FOLLING PRESET TOUR AT NIGHT ONE CAM DOES THE OTHER TWO HAVE A MIND OF THEIR OWN ALL THREE ARE FINE IN DAY LIGHT Share this post Link to post Share on other sites
tomcctv 187 Posted June 8, 2011 are you using a rs485 to rs232 for your ptz Share this post Link to post Share on other sites
NETVOYAGER 0 Posted June 11, 2011 using rs485 for ptz only from rear of server Share this post Link to post Share on other sites
