GeoVision stops monitoring

[SambaNoodles 0]

Hi. I am using a 16-ch (analog) +2 IP cam Geovision system with 1TB of storage space.

 

I am running v8.4

 

For some strange reason, after runnning flawlessly for a few days, the monitoring (recording) of all cameras stops by itself.

 

In the system log, they refer to this event as "Monitor Stop". I have no idea why that happens. And, unless I manually start monitoring again, (or restart GeoVisioin), then no recording happens.

 

Anyone know why that might be? Might it have something to do with the recycle threshold limit I have (default value was set at 1450MB for me)?

 

Any help will be greatly appreciated.

[GeoVision_Tate 0]

Hi SambaNoodles,

 

Basically, the multicam program will only stop recording after you manually stop monitoring or via the scheduled time is up

 

There are two things you can do in NVR/DVR to automatically start recording when 1. restarting the multicam program and 2. system idle is over a certain seconds

 

1. restarting the multicam program

> stop recording and click on F9

> under startup, tick the start monitor box

 

2. system idle is over a certain seconds

> stop recording and click on config button > system idle protection setting

>check auto monitoring, tick monitor all box and fill in the idle duration you want the system to automatically activate recording (system idle over:)