Jump to content
smartec

anyone has this problem with dvr before?

Recommended Posts

Hi,

 

i am wondering whether you guys has similar problem that i am encountering. My hi sharp dvr shows that channel 1 is video loss, but when i tried to swap the camera from channel 1 to channel 2, it shows the image in channel 2, but not in channel 1. and if i plugged the other camera to channel 1, it will still shows video loss. Anyone has experienced this before and might know the problem and solution for that? I have several dvrs with this issue.

 

I also encountered this with i catch dvr before.

 

Regards,

 

howard

Share this post


Link to post
Share on other sites

Do you mean the bnc input in dvr? i hv checked the bnc input in dvr, all of them are normal. But only specific channel doesnt show the camera images. Bnc output in camera is perfectly fine too since i hv tried to put it in diff channel and it shows cameras image.

 

Hv you encountered this problem before?

Share this post


Link to post
Share on other sites

You've plugged multiple cameras into the same input and it consistently shows signal loss. This means that the input is faulty. Yes, I've seen it before on cheap DVRs with poor quality control.

Share this post


Link to post
Share on other sites

Open your DVR and check the soldering of the BNC sockets. This is usually the problem. If they are fine, it is probably nothing you can fix yourself.

 

Replace the DVR if you still have warranty.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×