Noor3406 0 Posted February 14, 2012 hi everybody..I am Noor and I am studying in Italy for a PhD in animal behaviour. I need to install a video system for monitoring animal feeding behaviour and i am at a complete loss...I have a panasonic WJ-HD220 and can't connect it to my PC...If anybody can help me..I am so dull in these issues!!!hope that you may help me...thanks you very much... Share this post Link to post Share on other sites
Soundy 1 Posted February 14, 2012 How do you mean you "can't connect it to your PC"? What have you tried? What is or isn't working? Share this post Link to post Share on other sites
Noor3406 0 Posted February 14, 2012 I have try to connect the recorder with a cross type ethernet cable and after initialising the html (by switching the mode bottom at the back of the recorder) I lauch internet explorer and put the ip address: 192.168.0.10 ..which is as the instructions in the manual stated.... simply couldn't get any conenction.... I tried to restart my computer...change the ip settings..etc... nothing work.. The issue that is annoying me a bit is that after initialising the HTML in the recorder..there is a message where it said (turn off and press stop) which don't make sense..as if the recorder is off ..the stop button don't do anything...and then I reset the mode button at the back to normal ... I have lost hours trying to fgure out what is wrong::.... any suggestions, advices etc..would be more than welcome.. thanks Share this post Link to post Share on other sites
paddysmith 0 Posted March 3, 2012 Hi , I have a newbie.I can understand your issue. first i don't know the tv section so Do i gather information from this forum? Share this post Link to post Share on other sites
