edi 0 Posted September 19, 2012 Hi All, I have installed the CCTV software ViewCMS on a PC with Win 7 64-bit of a client where I have Installed a CCTV system. At the first time I installed it,everything was ok as I got connected to the DVRs and all the cameras. But after I restarted (closed and reopened) the software I saw that all the configurations I made before were canceled and I could not get connected to the DVRs and to the cameras. Does anyone have an idea if this has to be with the software ViewCMS or it is a problem with the Win 7 64 -bit? I have installed the same soft on a PC with Win 7 32-bit and it works ok. I have done all the needed updates of the PC that has the Win 7 64- bit. Thnx. Share this post Link to post Share on other sites
tomcctv 187 Posted September 19, 2012 Sentient / swann /cnm there CMS is not the best. you need to give admin rights to the programme files ... but even then you still will have problems go down each file on pc and give each adminisdtrator rights...... then reset up your dvrs and then save Share this post Link to post Share on other sites
