ekrol 0 Posted September 22, 2012 Hi new here I have a AD edvr connected to my pace 4111n modem/router so far if correct edvr ip = 192.168. . came from list inside router (internal ip) subnet 255.255.255.0 from ipconfig on laptop gateway 68. . . came from whats my ip (I believe is the external ip) also opened port 80 for 192.168 . . tested port 80 says open typed my external ip :80 from remote location and says oops connection broken but if I type in my internal ip of the dvr in address bar on home pc I can view cameras What am I missing so I can view remotely Share this post Link to post Share on other sites
Blake CCTV 3 Posted September 24, 2012 Aswell as opening port 80 you need to port forward this to the dvr. When your router gets incoming traffic on a port that is open it will let it through but if you don't tell it where to go it won't have a clue. Port 80 is the default port for internet traffic and would've been open on your router anyway. You need to tell you router to send any incoming traffic to the ip address of your DVR. Share this post Link to post Share on other sites
jakesoundels 0 Posted September 24, 2012 ...And don't forget to make arrangemets if you have a dynamic ip like signing up for a dynamic ip service. Share this post Link to post Share on other sites
