Wyn 0 Posted October 23, 2012 Hi all I've pcked up a used Bewator Eventys Lite EVLB-R16-1TB-T DVR Seems to work ok with my 4 home cameras and now want to add a dm ptz aswell as know how its other functions work So would like to know if anyone has a user manual to show how to set one up or know where I could get one? I emailed Bewator (now Siemens) here in the uk but had no reply Any help appreciated Cheers Wyn Share this post Link to post Share on other sites
coolie11 0 Posted October 28, 2012 See Below. Just match the settings from the camera (LOOK AT MONITOR WHEN YOU APPLY POWER TO CAMERA) in the DVR's PTZ settings section. Camera settings in CAMERA is not necessary if you are only using ONE PTZ. After communication is established, you can use preset 95, to gain access the cameras on-screen menu (IF EQUIPPED). Share this post Link to post Share on other sites
Wyn 0 Posted October 31, 2012 Many thanks for the pointers. Yes only adding one ptz to the other 4 static atm As it is I have a picture but have no camera control I've adjusted the DM 2060 domes blue/yellow rota switchs so on power up the monitor shows camera as 01. I assume this to be now correct? These pics show the dvrs settings i've added - but am only guessing as what is meant? http://img.photobucket.com/albums/0703/900ss/Bits%20n%20bobs/screen4_zps8802a96c.jpg http://img.photobucket.com/albums/0703/900ss/Bits%20n%20bobs/screen3_zps163f2a4c.jpg http://img.photobucket.com/albums/0703/900ss/Bits%20n%20bobs/screen2_zps00767715.jpg http://img.photobucket.com/albums/0703/900ss/Bits%20n%20bobs/screen1_zps8d35e25c.jpg Under Analog camera -Not sure what to set Dome ID to ? Also termination - I assume it to be yes ? Other then those I'm stumped Share this post Link to post Share on other sites
