Fars666 0 Posted April 21, 2013 Hello everyone, Guys I need a suggestion. Well I have dahua DVR 4 CH loop out and basically I want split CH 1 loop out into two monitors. I found some very cheap BNC splitters "Y" but I also heard that splitting single bnc video output into 2 outputs is not a good idea... Because Video cable uses 75 ohm cable (and output stages), and If I gonna split the video signal into 2 monitors will i get 37.5 ohm on each of them? what would be the consequences. I really need to couple 1 loopout so Ill be able to watch it on 2 x monitors and each of them is installed in different room. Any suggestions would be great ! Thank you in advance !!! Share this post Link to post Share on other sites
erikdv 0 Posted April 22, 2013 We had a similar scenario where we split the camera signal to 2 monitors + DVR. Although it worked with the standard splitters there was some video loss. We got a Speco Video distribution unit that helped the situation. Here is a link http://specotech.com/product/432/VIDDIST.html Hope this helps. Share this post Link to post Share on other sites
