edyx26 0 Posted June 21, 2013 Hello everyone, I have a problem with Samsung SHR-3040 that will not start, I enclose a link to Youtube where I put a video that shows the problem. Many greetings, Edin Share this post Link to post Share on other sites
SectorSecurity 0 Posted June 21, 2013 Do you have a monitor connected? I have run across some DVR's that will not start properly without a monitor connected. Share this post Link to post Share on other sites
edyx26 0 Posted June 21, 2013 I tried it on both ports, VGA and BNC video output, I have in the shop (I service the CCTV equipment) 2 Samsung SHR-3040 with the same defect. Power is ok 12V 4A, inside DVR I have all the proper voltages. Share this post Link to post Share on other sites
SectorSecurity 0 Posted June 21, 2013 Check the board for any bent or broken capacitors I have seen this before, do you get any error message on screen? Is there a hard drive connected? Share this post Link to post Share on other sites
