mikesd 0 Posted July 15, 2013 Hi, I Need help with Lorex LNR280 from Costco and adding Swann cameras to it. I bought the Lorex package from Costco and another 4 Swann cameras. The Swann cameras are attached to my network with POE switch the problem is that I can`t make NVR to record them. If Swann cameras are attached to the NVR POE everything is fine but if they are on the switch they are not recording and I`m not able to see them with remote access application. Already tried different setting nothing changes. Is there any solution for this situation? Thanks! Share this post Link to post Share on other sites
mikesd 0 Posted July 16, 2013 Fixed now. Need to change the Swann cameras password to 000000 and to connect 1 of the camera ports to the router. Now Lorex NVR recognize all cameras like Lorex. Share this post Link to post Share on other sites
chakatania 0 Posted August 17, 2013 Fixed now.Need to change the Swann cameras password to 000000 and to connect 1 of the camera ports to the router. Now Lorex NVR recognize all cameras like Lorex. How did you do this? Did you use a software of directly from the Lorex NVR? Or from the web? And if from the web...where?? We cannot seem to change the password of the Swann camera as it reverts back to the old password when we close the window out. Did you "add" the serial number of the camera? Thanks...any help would be appreciated! Share this post Link to post Share on other sites
RottenMutt 0 Posted August 17, 2013 did you connect the camera to a computer and log in and change the password? what about the subnet? lorex: acct: admin pswd: 000000 Swann: acct: admin pswd: 123456 default lorex is 172.168.1.64 ??? Swann is 192.168.1.64 Share this post Link to post Share on other sites
