cyclone 0 Posted January 7, 2006 Hello all, my first post. I'm using a GV 800 P4 3g computer 1gb ram occasionally the screen moves ( very slightly) up then down. this activates the motion detection anyone experienced this ? any suggestions ? Regards Cyclone Share this post Link to post Share on other sites
VST_Man 1 Posted January 7, 2006 had it with cheap baluns (passive) & CAT5 UTP and with a cheap ground loop isolator......... Share this post Link to post Share on other sites
cyclone 0 Posted January 7, 2006 thanks for the reply, One of the camera, is one a RCA cable approx 15m i will do some testing, with a camera connected directly to the card. Cyclone Share this post Link to post Share on other sites
ezCCTV 0 Posted January 9, 2006 Have you tried changing the AGC settings Found under Video Attributes > Standard > AGC Click Auto a couple of times, and Apply it. If this does not work try changing them manually.[/b] Share this post Link to post Share on other sites
