Hikvision 2032 Camera - IR lights not working

[Baileyb 0]

Hi,

 

I have a few Hik camera's (2032) (Chinese versions) and installed one of them on the weekend and one of them the IR lights do not illuminate.

 

Is this a faulty camera or a setting. The picture works fine in the day but nothing at night time.

[flynreelow 0]

Hi,

 

I have a few Hik camera's (2032) (Chinese versions) and installed one of them on the weekend and one of them the IR lights do not illuminate.

 

Is this a faulty camera or a setting. The picture works fine in the day but nothing at night time.

 

 

Did you turn on the IRs in the cameras menu setting? This cab be set to Auto, or a specific time.

[MaxIcon 0]

You can also put it into night mode manually just to check that they're coming on at all.

[Brenning 0]

Could be faulty. I may be interested in buying If you cant return it.

[empedokles 0]

Where can you disable its IR-lights?

[catseyenu 0]

Where can you disable its IR-lights?

Camera configuration accessed through the browser.

[empedokles 0]

This is fairly obvious, but Hikvisions GUI still is a nightmare to use.

[empedokles 0]

Found it, but now I get lots of noise.

[Baileyb 0]

You can also put it into night mode manually just to check that they're coming on at all.

 

 

Found the setting to turn on and off. Thanks, seems to be working atm.

 

How can you do them manually to check working in daylight for future cameras?

[MaxIcon 0]

To check auto-switching, I either turn off the lights in the garage as I set them up, or drape a towel over it.

 

For manual switching, it's on the image settings tab. I believe the actual location changes depending on if you have profile switching turned on or not, but I'd have to check.

[niofar 0]

Sorry delete my reply, i made a mistake.

Thanks