aurmol 0 Posted November 9, 2014 Have anyone come across this? When I set my NVR to 4 channel multiple views in my monitor, it would display it for a second then it will switch to alternate full screen from one channel to another. There is no setting for such choice. Why can't I view it 4 channels in one screen? Is there a minimum monitor requirements for display multiple channels? Share this post Link to post Share on other sites
abdelm01 0 Posted November 9, 2014 What DVR do you have. There should be a setting in the configuration to where you would need to disable Dwell timing and set your live view in 2x2 mode. Share this post Link to post Share on other sites
oMo 0 Posted November 14, 2014 Hi, I think it could be a "full screen on motion" setting hidden in the settings somewhere. Maybe under a different heading. To answer your Q about the monitor. To my knowledge, there is no minimum requirement. Even if you used a CRT monitor it should work so long as it was connected to the VGA output on the NVR. Share this post Link to post Share on other sites
