Keribi 0 Posted November 9, 2014 I have a possibly defective Lorex MCND2152 1080p dome camera and want to check the cameras firmware settings for anything set wrong. I cant find the login info for the camera anywhere on the net. I think it is a Hikvision camera made for Lorex but none if their logins work. Tried U:admin P:admin U:admin P:000000 U:admin p:123456 among others with no luck. Lorex support is at least a 40 minute wait so maybe someone here knows the Login??? Share this post Link to post Share on other sites
Keribi 0 Posted November 10, 2014 I figured it out! The login info for the individual cameras is set the same as the NVR login. So when a camera is added to the network its credentials are updated to the NVR admin login. Share this post Link to post Share on other sites
dopalgangr 0 Posted January 25, 2020 I realize this is very old thread. I have same issue with that camera and Im trying to figure out what the IP addy is. Does the NVR statically assign them to the cameras or are these cameras set to DHCP? Thanks ***disregard, the camera is not responding, not an IP issue Share this post Link to post Share on other sites
