nvr 7616ni-se/8p and access to ip camera web interface

[linix86 0]

Hello, I have a nvr Hikvision 7616ni-se/8p and would like to know how to access the individual cam to change values day / night and the like. Unfortunately I can only access NVR while the cam no because the poe ip class goes on a different and you can not set the same class ip between nvr and poe

[abdelm01 0]

Yes, you can get into the Camera Interface as long as you have the latest FW on the NVR. If you have the latest., go to Configurations--> Network Settings--> Check Enable Virtual Host. Now go to Camera Management and you will see a link to the camera.

 

What FW version do you have on the NVR.

 

Here is the Latest one if needed. :

http://www.hikvisioneurope.com/portal/index.php?dir=Product%20Firmware/Recorder/DS-7600NI-SE%207600NI-V%28VP%29/V3.0.10%20Build141125/

 

Also after you upgrade your FW for the NVR, make sure you delete the web browsers history and exit your web browser, because you will not see the new settings if you do not do that.

[linix86 0]

Yes, you can get into the Camera Interface as long as you have the latest FW on the NVR. If you have the latest., go to Configurations--> Network Settings--> Check Enable Virtual Host. Now go to Camera Management and you will see a link to the camera.

 

What FW version do you have on the NVR.

 

Here is the Latest one if needed. :

http://www.hikvisioneurope.com/portal/index.php?dir=Product%20Firmware/Recorder/DS-7600NI-SE%207600NI-V%28VP%29/V3.0.10%20Build141125/

 

Also after you upgrade your FW for the NVR, make sure you delete the web browsers history and exit your web browser, because you will not see the new settings if you do not do that.

 

thank you very much, I solved, thanks