mackyboy 0 Posted January 23, 2015 Hey guys, wanted your input on this coffee shop im about to do an install area has low ceiling, if i jump a bit i can reach the ceiling, im bout 6 ft. the interior designer is bout to install pendant like designed lightings dangling from the ceiling. from render its about 24-27 inches dangling from the ceiling how do you even install cameras in this place? and do u know of any system hd or ip that has camera lenses that will cope with this glare? Share this post Link to post Share on other sites
abdelm01 0 Posted January 23, 2015 Looks pretty simple. Just don't put the camera right above the light where the light would bounce back and blind the lens. Put the camera on the other side of the room facing towards that area if needed to be covered. You can use just the simple hikvision cameras with NVR will do the job. Can you take more pictures of the area so we can get a better look around for camera location opinions. Share this post Link to post Share on other sites
mackyboy 0 Posted January 24, 2015 Hi thanks for the reply. This is just an artist perspective render and from the lightings plan, its a bunch of these lightings all over the room even on opposite sides. How bout wall mounting instead of ceiling mount ? Placing it lower than pendant lights? I just need a decent looking upscale camera hehe Share this post Link to post Share on other sites
Boogieman 1 Posted January 24, 2015 Hi thanks for the reply. This is just an artist perspective render and from the lightings plan, its a bunch of these lightings all over the room even on opposite sides. How bout wall mounting instead of ceiling mount ? Placing it lower than pendant lights? I just need a decent looking upscale camera hehe Whats your budget? https://www.youtube.com/watch?v=V_yNqbSBL14 http://www.hikvision.com/en/us/Products_show.asp?id=9811 http://www.scallopimaging.com/ Share this post Link to post Share on other sites
mackyboy 0 Posted January 26, 2015 Thanks boogieman! the word budget almost gave me a scare hahaha.... the mobo are awesome but im sure it will be over the client's budget. I will try to find those PIR type covert if they have it in ip or hd and definitely wall mount it instead. i just need to have an ok from the interior designer.. thank you!! Share this post Link to post Share on other sites
