Khalidkawoosa 0 Posted March 25, 2015 Hey Guys, Have been working CCTV setups from past two years. Want to know any recommended suggestion to install 12 cameras, 8 ptz's and four fixed lenses in an efficient manner. I am concerned about the topology of the system i.e any efficient manner to lay the cable as well as install the setup. Thanks and cheers! Share this post Link to post Share on other sites
jazzar 0 Posted March 31, 2015 there are various single channel/4/8 channel fibre optic units out there. you can daisy chain from cam to cam and use a fibre each, you could also use a multichannel receiver via 1 fibre to a common collection point near the cameras or a bit of both. use fibre to a break out box then run copper localy to cameras that are near each other. your info supplied is a bit low on info ie distances involved /local power available etc. Share this post Link to post Share on other sites
