sceh 0 Posted October 26, 2015 I have Swann PRO530 and 510 cameras and one of them is fine during the day but at night the LEDs are not red and there is a very poor image. Clearly the infrared is not working. Is there any easy resolution to this? Can the LEDs be replaced easily with a decent soldering iron? I alos have a couple where not all the LEDs are red as well. thanks for any hints Share this post Link to post Share on other sites
Wonderlands 0 Posted October 27, 2015 The insufficient current to the camera (low PSU, too-long run, too much cables) is a possibility. Before replacing the ir board, go and have a check. Share this post Link to post Share on other sites
