vtsyrlin 0 Posted February 29, 2016 HI All, Having trouble with the initial configuration of the unit. Have 10 Axis IP Cams , M3005, P3364 series. All cameras are connected and streaming ok. Plan is to connect TV directly to NVR and display live view stream on TV permanently. ie. I have no plans on running IVS client on another pc. Now some questions: 1. Live view - There isn't a live view screen that allows only 10 cameras to be displayed. There are 3x3, 4x4 but not 5x2..Are these live view screens customizable (without using IVS client software)? I simply only want to see my 10 cameras on the live view screen. If I create a custom live view screen using IVS, can I upload that to NVR and select it under live view? 2. Can you set a live view resolution for each camera independently? I am confused since some cameras in live view grid are displaying in 640x480, while others are 190x120. I can't figure out where do I change the live view settings for each camera? Most of the cameras are 3 or 5 mega pixels so why am I only seeing 190x120 is beyond me! Obviously is I view the camera in question on a single screen, the image is perfect of high quality. Thanks heaps. Vlad Share this post Link to post Share on other sites
Securame 0 Posted February 29, 2016 1. Nope. Take a paper and pencil, and try to divide it by 5x2 maintaining proportions. Can't be done. 2. That is your camera substream. When you see many cameras, the NVR will show you the substream. When you make one of them full screen, it will use the main stream. Share this post Link to post Share on other sites
vtsyrlin 0 Posted March 1, 2016 1. Nope. Take a paper and pencil, and try to divide it by 5x2 maintaining proportions. Can't be done. 2. That is your camera substream. When you see many cameras, the NVR will show you the substream. When you make one of them full screen, it will use the main stream. 1. LOL. You are quite right. Might have to select the best 9 feeds out of 10 camers. Incidentally, would you suggest a particular live view display grid? (I am quite new to this product so any suggestions would be greatly appreciated) 2. got it.. So my Axis P3364 has multiple substreams, how does NVR pick one over another? Regards Vlad Share this post Link to post Share on other sites
