quickddns asks for password/username "dsl router"

[theovt 0]

Hi, I am trying to install a DVR system for remote access via Quickddns.

I have logged in on the quickddns website where i can see my 000000000.quickddns.com domain.

When i click on it a new window opens and they ask for a username and password.

"http://00000000000.quickddns.com vraagt om een gebruikersnaam en wachtwoord. De website meldt: ‘DSL Router’

I cannot find out what password/username they want. tried everyone.

it also says "dsl router", but it is connect thru a cable and NOT via WIFI so i don´t get what it wants.

 

Please help me.

I have been searching the internet but cannot find an answer.

 

Thanks!!

[tomcctv 187]

Hi which recorder are you connecting .... Make

[theovt 0]

i bought it from a store in Spain and i cannot find a make on it.

i have been searching on internet and i am finding information with the same software showing.

but the process they show end when you click on the domain in the quickddns website.

but my problems start at that moment....

 

Here are some images to show what happens.

I have setup the quickddns account in the webservice.

then tested it and got the ok.

then opened the website from quickddns where you can see the domain there.

but when i click on the domain to open it i get the authentication bar......

 

frustrating.....

 

Hope you can help me. thanks in advance

[tomcctv 187]

Hi. That is dahuas ddns service and you need to be using a dahua

 

Can you post screen shots of your dvr screen and of the recorders network page

 

Also does your recorder have a serial number on it with a bar code

[theovt 0]

hi, i do not what you mean by "screenshot of your dvr".

Hope that these are what you are looking for

 

Thanks

[Securame 0]

Use a HTTP port different than 80.

 

You are actually accessing your router, and not the DVR or quickddns.

[theovt 0]

Thanks,

i have changed the http and now i does not give the message anymore but instead it says the following (see image):

now i cannot reach the dvr via the ip adress anymore. so anychanges i have to do directly in the dvr.

it gives the same message, page not found.

i have avg antivirus and also switched it off to see if that helped but that did nothing.

[Securame 0]

You have to forward/open the HTTP ports on your router.

 

To see if you have the open port working, you can use:

http://www.yougetsignal.com/tools/open-ports/

 

And the Quickddns will usually NOT work from inside the network where the DVR is installed (unless your router has NAT loopback, which is not common).