Jump to content
voloftn

Merit Lilin PIH-7000 Power

Recommended Posts

I am a newbie to installing a PTZ. We have power running to our PTZ through the siamese wire that services it along with the video, which comes from the 16 port, 12 v power supply. Do I need to run an additional power line of 24v to the camera? The camera has a power brick that has 3 leads for power which converts it to 12v. How do I go about connecting it to power? I have a CAT5 cable I am going to use for commands.

 

I seriously need some help this weekend on getting it running, due to a theft situation that may be occuring in the store.

 

I appreciate any help.

Share this post


Link to post
Share on other sites

Please see the image below.

 

If you have the top image, then you can run 24V over 2 core cable or using CAT 5. If you are using the version with a clamp i.e. 90 - 260VAC, then I imagine this will be mains power, not be be run over CAT5!.

 

46209_1.jpg

Share this post


Link to post
Share on other sites

I appreciate the reply and the help. However, I am still confused and I don't think that applies to what I have. The camera has a stand alone power supply that doesn't attach to anything other than power coming into it. Those diagrams aren't related to what I have.

Share this post


Link to post
Share on other sites

This was taken from the Merit Lilin PIH-7000 Manual. I suggest you call your PTZ supplier, or Merit Lilin direct, as their support is very good

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×