Jump to content
bothwellbuyer

Dahua HCVR5108HS-S3 gone faulty

Recommended Posts

I installed the DVR in 2016, with 7 Dahua external cameras; and using DMSS to access the cameras whenever I was away.  One camera has been giving problems which I found was a bad connection .  This is the only fault I have had on the system (aside of another camera IR being faulty)

In the past 8 weeks, I've not managed to get access to the cameras via DMSS as it showed the camera loading and then saying connection failed at 97%.  I've been stuck at home due to after effects of having Covid so just got round to checking DVR and its output to the screen attached by HDMI cable.  The screen shows a 'no video input' message.

I had a look at the DVR and cable connections seem tight enough.  Power off and back on and no change.  No video coming through.  The only thing I am getting is a flashing blue light on the front power led of the DVR

Any ideas - is the plug in power knackered? 

The power and fuse box for the cameras show power is going out to each camera.

I fitted a large 6TB disc to the DVR which has been working ok, but am aware these things start going faulty around 5+ years old.  Could tht be it?

Just not sure what I should be testing or checking. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×