Jump to content
SL25

Rebooting need

Recommended Posts

Hello, I have a Dahua DVR and I am facing a problem where every time the DVR loses LAN signal (from different reasons), I need to reboot the DVR when the signal comes back because the DVR doesn’t reconnect with the internet by itself. The moment I replug the DVR, it gets normal immediately. 

Share this post


Link to post
Share on other sites

If you have manually set an IP address on the NVR, make sure to exclude this from the DHCP range on your router. Or set the NVR to DHCP and create a static IP address map in the router for your NVR.

 

Last year I set a camera's IP address manually and it worked for a day. Then the router did a shuffle of DHCP leases and for some reason it didn't recognise the camera wasn't going to change address. The router then set another device to the same IP address as the camera.

Both devices were randomly working until I found the cause.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×