tbooth 0 Posted January 18, 2007 i recently purchased a 4 channel drv card off of ebay, this is the card: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=018&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=280053616992&rd=1&rd=1 It came with MagicDVR software ver.2.45 of the CD, there was no manual just the install program. It loads and i have a couple cameras hooked up but it will not do realtime video over the monitor, it shows still shots until i refresh the screen. I can't find and model number on actual card so I can do some more research. Has anyone here used this card and software? Many Thanks Share this post Link to post Share on other sites
crirvine 0 Posted January 19, 2007 LOOKS LIKE YOU MIGHT HAVE A CLONE CARD READ SELLERS HISTORY BUYER STATES HIS ORDER CAME FROM CHINA. Sorry this is all the help I can give for E-BAY cards. If it is a true Magic Radar card the following must be followed 100% to work. The prices of these cards say CLONE all over them. The reason the software is that old is the new software will not run on old cards or clones. The motherboard must meet the specs listed below for TRUE 100% Magic Radar Cards. VGA : ATI Compatible AGP Graphic Card, VIP(Video Input Port)Existence Main board: No higher than Intel845 Resolution : 1024 × 768, 32bit Color HDD : 30GB or more Backup Storage : CD R/W, Tape Backup System, DVD-RAM, etc S/W : Direct X 7.0 or later Driver : DVR Driver You have to use these parts ONLY INTEL 845G Motherboard http://www.newegg.com/Product/Product.asp?Item=N82E16813151160 INTEL P4 2.0 GIG (NOT AMD) ATI VIDEO 7000 64 meg agp card 256 Meg Ram the video needs to be on a differant drive from the OS WIN XP HOME THIS MOTHERBOARD MIGHT WORK http://www.newegg.com/Product/Product.asp?Item=N82E16813128027 Share this post Link to post Share on other sites
