Jump to content
hio

AVC770 power supply pin-out

Recommended Posts

I've got an old AVC770 from a friend, but he lost his power supply. Could someone tell me the pin-out from the 4 pins (SVHS) connector at the rear?? Is it 5V and 12V ???

 

Thanks

 

Robert, Netherlands

Share this post


Link to post
Share on other sites

I do not know the answer to your question as I have never worked with the 770.

 

I am going to guess that it uses a 19 volt power supply but that is a guess.

 

I would ask you to open the case and look at where the power supply connector is located. How many wires are soldered to it?? I imagine that it probably looks like an S video "style" connector.

 

If it has only two wires on it trace it back to the PC board, and see if there is anything printed on the board that indicates the voltage.

 

You should be able to buy the power supply as there are places on the net that sell them. There is also a source in Canada.

Share this post


Link to post
Share on other sites

If you can't find any docs, you could try this as it's very possible it provides fully regulated 5/12 VDC as you suggest:

 

Use an ohmmeter and see if there is a direct connection from the mini-DIN pins to the plug on the hard disk connector. +12 VDC = yellow wire, +5 VDC = red wire, GND = black wire.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×