Server upgrade postponed



View unanswered posts | View active topics


Reply to topic  [ 3 posts ] 
Author Message
  
 Post subject: HELP! NEED REVIEW FOR AMEBA AC334D-OD4Z
PostPosted: Thu Sep 28, 2017 8:48 am 
Registered User

Joined: Sep 2017
Posts: 1

Offline
HI!

I am a new business owner and the building came with this surveillance camera:
AMEBA AC334D-OD4Z

I want to know if this camera is sufficient and if I need to replace it. I am most concerned with the motion sensor, and I am afraid it might have lost its accuracy over time. Below are the specs.

If there is any other information on this camera or some huge red flags please comment below. An overall review of the specs work for me to.

Thanks for your help in advance.

Camera Specifications

Image Sensor 1/3" Progressive Scan CMOS
Effective Pixels 1920(H)*1080(V)
Min. Illumination 0.01 lux @F1.2, AGC ON, 0 lux with IR
S/N Ratio >62dB
Video Output 1 Analog HD output
Lens Motorized VF lens; 2.8 - 12 mm @ F1.2
Lens Mount F14
Day & Night ICR
Shutter Speed 1/25s to 1/50,000s
Angle Adjustment Pan: 0̊- 340̊; Tilt:0̊- 75̊; Rotate: 0̊- 355̊
Automatic Gain Control Support
Digital Zoom 62x
White Balance ATW/ MWB

Camera Features

Day/Night Color/BW/SMART
Backlight Compensation BLC

Video

Frame Rate 1920×1536@18fps

Image

Frame Rate 1920×1536@18fps
Digital Noise Reduction Digital noise reduction, Mirror
Wide Dynamic Range 120dB
Backlight Compensation BLC

Interface

Video Output 1 Analog HD output

General

Power Supply 12 VDC/24 VAC±15%
Power Consumption Max. 6.5W
Dimensions 145.2mm×124.1mm ( 5.72”×4.89”)
Weight Approx. 1600g ( 3.53lb)
IR Range Up to 40m
Operating Humidity 90% or less (non-condensing)


Top
 Profile  
Reply with quote  

  
 Post subject: Re: HELP! NEED REVIEW FOR AMEBA AC334D-OD4Z
PostPosted: Tue Oct 10, 2017 1:52 am 
Registered User

Joined: Oct 2017
Posts: 53

Offline
Doesn’t sound bad to me. But that camera is likely made by a larger manufacturer who uses Dahua or hikvision OEM. And don’t worry about motion detection, that’s done via software. The motion sensors don’t “go out” over time.

You need to figure out who actually makes that camera and then look up the reviews for them.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: HELP! NEED REVIEW FOR AMEBA AC334D-OD4Z
PostPosted: Tue Oct 10, 2017 2:49 am 
User avatar
Integrator

Joined: Aug 2009
Posts: 8859

Offline
Hi. Camera is a China made TVI. And if needed a replacement I would look for something better than a dome.
But you system is tvi so always look for tvi .... not tvi3


Top
 Profile  
Reply with quote  

Display posts from previous:  Sort by  
Reply to topic  [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

It is currently Fri Oct 19, 2018 1:02 pm

The contents of this webpage are copyright © 2003-2016 CCTVForum.com. All Rights Reserved.