Jump to content

msecure

Members
 View Profile  See their activity

  • Content Count

    341

  • Joined

  • Last visited

Posts posted by msecure

  8. Posted

    I have a KKMOON S378W-EU camera, can you change the firmware in some way?

    Because it happens to her something strange how a little work it likes to sometimes put in some strange position. Maybe some better and newer firmware would solve the problem

     

    [attachment=2]IMG_20171003_135637.jpg[/attachment]

    [attachment=1]IMG_20170916_115936_1849026.jpg[/attachment]

    [attachment=0]IMG_20171003_135707.jpg[/attachment]

    Does it always goes to the same position when trigger by motion? Otherwise, there is a possibility that someone is watching you

  10. Posted

    I would like to purchase a POE system as I have heard they are a bit better than BNC. Having said that I don't have Ethernet in my garage which is where I would like the cameras installed. Is it possible to use Powerline adapters & power injectors or some sort of POE switch to get ethernet/POE into my garage and keep the NVR inside the house? I called Swann support and they recommends the cameras be plugged directly into the NVR, but they werent sure if it would work with powerline adapters.

     

    Can I make a POE system work in the garage?

    You do not need POE NVR, just get normal NVR with a pair of Ethernet over Power(Powerline adapter) and @ garage just use a POE switch connect to the EOP.

  12. Posted

    Hi. With dash cams now being a standard accessory in cars and trucks.

     

    We have a high failure rate. Not just from cheap cameras but also $200-$300 cameras

     

    We always install class 10 SD cards and not ones supplied so we know we don't have recording problems.

     

    We have 4 of the Vicovation marcus 5 http://www.vicovation.com

    Not cheap at $250. Support was good for two systems but then no reply to emails. With the amount of firmware updates out should of been a warning there was a problem. Also other problems with the Marcus 5.

    Does not like heat at all .... And both cameras run hot anyway so summer use they are for ever shutting down.

    We have also had to replace power supplies on 2 out of the 4 ... Not good enough to run both the cameras.

    The picture quality is one of the best out of all we have used and the added benifit of rear camera also good images

    But system is no good with reboot problems system life 13 months

     

    Nextbase is another brand we have 2 of https://www.nextbase.co.uk

    Good little small camera but again heat problems ( they just shut down till cool) this has only happened to 1 of the cameras. Customer puts it away when car is parked up. Which prevents using the shock sensor function

     

     

    It would be interesting to hear what others use and to be honest with how they stand up to everyday use.

    Personally, am not using but from what I know I have associates that bought this Anytek Dashcam and they has been using with no issue since he bought during the 2015 CPSE in Shenzhen. BTW, Malaysia weather is hot 7/24 365 days

    Note: I will check if it's still working though, since no incidence they might not have try playback.

  13. Posted

    HD doesnt really have to do with the cables. If you want to continue to you current cables you can. you just have to get a AHD or TVI system. Your current cables will not support an IP system (uses cat5 cable).

    Wrong, there is a converter call EOC, ethernet over coax.

    https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/ref=pd_lpo_vtph_147_bs_t_2?_encoding=UTF8&psc=1&refRID=K32S2BCNHYQFF6110Y9T

  14. Posted

    I have a problem with my dahua hcvr5108c-v2 from over a month. The static ip address keeps on changing to:

    IP : 10.95.190.83

    Gateway 10.95.190.206

    Primary DNS :1.2.3.4

    Secondary DNS: 1.2.3.5

    I correct it and every single time it changes to this. I changed passwords, default ip addresses in my dvr and router and all ports in my dvr. Still keeps on changing.

     

    Apart from this all my camera feeds are watermarked HACKED. All camera names are changed to hacked1, hacked2 and so on.

    What or who is screwing with me?Also i dont seem to find any new firmware on dahua's website.

    The screen already show hacked and you still need to ask? Second wave of Dahua hacked started last week.

  18. Posted

    No, most affordable DVR's support one audio through the internet or playback, I think I looked at some that were $2500 to $3000 and that is just too much money for a small difference. My neighborhood is better with help from the police.

    Most NVR will support IP camera with Audio for every channel because you do not need a physical audio port to have this function unlike normal DVR and they are not that costly.

  22. Posted

    Hi all,

    I'm trying to find a nvr system with 8 channels (cameras) which works with PoE, with a resolution of at least 1280*720 and which HAS AUDIO (this is the most difficult requirement).

    Does anyone have any ideas / recommendations?

     

    Thank you in advance

    John

    Many brand 8 Channel POE NVR have this function but where is your location?

  25. Posted

    Thanks for your answers.

     

    I already have a DDNS service, this is not the problem.

     

    The problem is that the local IP adress configured in the DVR is changed by someone or something.

    My local network adress is 192.168.xxxxxx

     

    But as I said, since a few days, if the DVR is connected to the network, the ip adress is changed like this :

     

    298351_1.jpg

     

    All values have been changed, not by me !

     

    Thanks.

    It could be related to the Dahua security backdoor flaw! I have a few customer dvr affected too.

×