tomcctv

Hi. Heat this time of year can cause your system to shut down if not ventilated. Also bad hard drive will do the same. To test hard drive........ remove it from your recorder and run your system without and see if still switches off

Hi. Yes there baluns .... so as your spec says your only have analog cameras. No ip or Poe is used. You must also have a cable end .... where all camera cables are located Just looks like last owner took there dvr

Hi. Can you post pictures of each end of cables ? Camera listing shows it’s a analog camera ..... I think your getting confused with balun and Poe

They won’t be happy if you keep spamming the forum.

Don’t even bother using this idiots link Says based in the US but in fact in China You are best not even dealing with a company that lies to you from the start Don’t trust a spammer.

Hi. I would look at a uk supplier Qvis do the viper 4 way NVR with 4 X 4mp cameras and has very good apps and CMS and also vms for Windows and apple. Are you looking for a home system or business system ?

Hi. If your system is managed by IT department then they are the only people who can help. You need to know the IP and ports ...... IT might have ports available for you

your last 4 useless spam posts ...... Says your CCTV and IT. Give it up if this is best you can do. Even when op did a good job on sorting out his own problem ..... YOU still come out with junk...... Nothing to do with his problem

Hi. Not what you want to hear but buying a secondhand Foscam was your first mistake .......you can buy them new for $40 Foscam tech support would not setup your static IP. Because they can't only your internet provider can do that for you. It looks like whoever it was who set up your camera just did some port forwarding to get it to work ..... And because you don't have a static IP your external IP has changed which will no longer allow you access. External IP addresses can last for a few hours or days or even weeks but they will change. ..... A static IP from your internet provider will always allow you access as your external will never change. On your app that tech setup for you you should see the IP address in app settings ....... You need to change that to your current IP address (click on link below and it will show your IP) https://www.whatismyip.com Getting your camera to work in your motor home is going to be harder in you don't know about networking. Your motor home will need Internet and a router. (Mobile /cell Internet) And also take into account cell network will cost you more than your camera each few days to watch your dog...... (2 costs mobile internet data for motor home and data costs for your cell)

Power adapters will work your right there called EOP but they don't power camera ....... If it's working you have power to your camera via power supply........which is not POE

Hi. Your rj45 on the controller would have gone with to a dvr with rj45. Ptz control or to a breakout box. The breakout box would of given two output options But if you want to go rj45 to dvr rs485 Make a new lead up ..... on the rj45 only use two wires one goes to pin 3 and one goes to pin 5 3 will go into dvr + 5 will go into dvr -

Hi. EOP units are much better than boosters and can also give better security . Try netgear https://www.netgear.com/home/products/networking/powerline/PL1200.aspx

Hi qvis have a lot more but over your budget. You also have dahua and hikvision ... but hikvision you will need to look at gray market products with your budget Lorex is another but you can only buy old stock in the uk at the moment Also you have TVT and avtech

So why do you not think the viper is a good option ?? It has all you have looked into and more. Uk manufacture with support

POE using my electrical wiring to transfer the signal!! Hi. Poe is power over Ethernet........ will not work with your electrical wiring...... that’s called EOP and only carriers data

No don’t buy crap from jkdc security company lies on its location Save yourself a headache and buy from a trusted company

Hi. Why do you want 4K ? With 5mp cameras just go 5mp NVR

Hi. In your first post your asking for nvr and extra camera. The budget you have listed is that for full system or nvr only Yes you get full uk support .... it’s a uk product

Hi. Are you looking for another cheap import ?? What is your budget

Hi. For the reason you need CCTV I would go for wired cameras and a dvr. Going SD card you will be up and down ladder each day and then having to backup the SD card to put it back. With a dvr and two cameras you could get a full month of play back and be able to connect the dvr direct to your tv.... No need for computer or any network. And you can play back anytime you like without stopping recordings. This system from DAHUA is a good starting price. As well as motion detect (which would make you tv bleep if needed) Also has spot detection. Which is very good. Say you notice your bin outside has moved ..... You go to playback.... Click spot and you put a spot on your bin with the mouse on the dvr..... Press play and it shows you the time and who moved your bin with video. https://www.lorextechnology.com/hd-dvr-security-system/2-camera-hd-home-security-system-with-long-range-night-vision/MPX42W-1-p

Hi. Are all cameras the same manufacture ?? But first thing you need to do is reset all cameras that are not working Looking at your picture two cameras will have a conflict as they have the same IP address. So that needs changing before you can connect. Each none working camera needs to be plugged into your router then go into that camera settings and reset. You are best removing 1 camera at a time from the NVR to plug into your router as NVR is showing the camera IP. IE .... Remove cam 7 and to loging once connected to router via PC the IP address would be 192.168.2.99

Another one

Never number 1 in world Worst apps ever for bot Apple and google

No don’t take your camera apart Infront of lens means it’s on the dome or glass. Web can’t be inside or you would not get a image of it. Like you said you have cleaned it and it’s fine but then it’s back Only takes A few mins for a web to appear..... next time play it back

Hi. Sorry CMS / NVMS. Is software for PC or Mac to also control NVR local or away. As far as apps we use super CMS for iPhone and pad and also superlive plus. We're are you located and I'll check for distributor. http://qvisglobal.com/downloads/dl/file/id/343/product/5065/viper_nvr_4_8_channel_specification.pdf http://qvisglobal.com/downloads/dl/file/id/364/product/5065/viper_nvr_manual.pdf