tomcctv

Hi yes it’s down and that’s good Where are you located to want to use a china ddns service

Why are you fixed on 4k This will be a waste of money for an apartment complex 4 or 5mp will be just as good for you and will not use a lot of your budget for storage.

Hi. No you can’t use another model firmware on a different model. Getting to web interface ... you just use nvr ip into your browser

No that’s not how it works But still you would of maxed out and that’s only 8 channels what about your 4 x 4mp Why buy a 32 way and only use less than half .... save your money and buy a 16way

Not on that recorder you can’t ..... max is 4 And if your looking at using 16 cameras ....... You can only use 16 X 1080p

Hi. Your two indoor dome cameras might just have a light problem. Get a tourch and shine it into your cameras and see if it goes colour. Your power supply problem ...... If your system is a year or so old then yes you will have a power supply somewhere you will need to find it

How many 4K cameras do you want to run on that recorder ?

Hi can you give make of recorder or post images of recorder network screen. Also which app are you using for your phone. You also never port forward 80 on your router so delete that rule.

Hi. Pick your camera first .... then pick the cable management box that goes with that camera. I would use turret cameras rarther than dome

Hi if you can’t find much on a product .... keep life simple and move on the something else .. I also had a look at there website and first page there statement......first company in the world to develop 265 poe kit in 2018 ....... also made me not to keep reading the website .... I don’t read stupid crap like that. Poe h265 was being sold in 2016 Look at lorex

Hi. Your going to be charging for a security service ....... but only recording . You need to do more than just a recorder and a few cameras.

Hi. It depends how you look at the spec You need to look at capability of the 16 way 16 cameras at res D1 ..... or 12 cameras at 720p or 6 cameras at 1080p Your existing cameras Swann did at one stage lock there cameras to only use on there system They are hikvision cameras you have but you will need to check how open they are...... you can do this by removing them from your recorder and connecting one direct to your router and see if you can get into the camera via your web browser

Hi. The Swann you have is better than the hi watch 16 channel at D1 ..... is pointless. That means lowering you cameras from 1080 to D1 It only does 6 channel at 1080p Look at something else besides the hiwatch systems

Again he is asking for camera pin out not not Ethernet method So your not that much of an expert And your not much good at reading rules either.... don’t spam

Hi. You will need to change unit password to 8 letters and numbers. Then go to app and register with dahua

Hi. I have sent firmware to your pm. Try this on your 16 first .... As it is not working anyway The Apollo is a dahua ..... But give that firmware a try (it is the Apollo version)

Hi. Some 16 and 32 use external power supplies ....... If yours is then try using the 32 power supply on the 16 and see if it starts. Not having any control of your 32 menu could just be your password does not have full admin rights to the system settings

Hi. Unplug all hard drives and cameras and network cable then try to start it up Also while it’s booting look at all the fans in unit and see if they are starting up........ fans are monitored if they don’t spin it will shut down

Hi all power lines have a IP address so you need to change each one and give it there own if using multiple IP address will be on power line .... enter that into your browser ( when both are paired) and set different IP address for each pair and give them a name as well so easier to find on your network

Down loading android app to a PC ...... What ever next

Also you have registered your unit with Xmeye server and as you can see next to were it says home it is on a China P2P It give home in Chinese..... But you have a problem now as you have left all your info .... So you will need to setup your recorder manually and not use the S/number Here I am on your login.

Here is your recorders QR code and it works no problem on the app I sent ...qr code I have blocked some of it otherwise everyone on forum can use it.

Don't be stupid It's the same app as you have been using just with a uk p2p For a start why did you try to load on a PC ..... Link I sent was for you phone For your PC you just go to Xmeye.net no app needed Why can people not do a simple task If you had followed my instruction from the start it will work ..... You clicked on cloud ..... Local link is what you use.

I know .........but a much better app Did you try it ???

Hi. Delete that app from your phone and I will pm you a better one. Once loaded click on local log in at bottom left then go to add device in top right Name it then scan the qr code from your pc screen by just clicking the qr code on the app and see if it connects