tomcctv

Can I ask what you have the data connected too if it’s using menu

I found the problem. Port 37777 was not open. Now everything works fine with idmss lite too. Good. Remember to copy the QR code from your unit and keep it safe. You need it if you loose password

Hi. Then you have a configuration problem if you can't connect to that .. Can you post a pic of your network page.

Hi. Ok do a test this is the old app for 3rd party OEM see if you can connect. EVOHD LITE by Bydemes https://itunes.apple.com/gb/app/evohd-lite/id522581739?mt=8

Everything that has additional power pull like IR or filter move yes needs more power .....not a lot and not long term but it will pull more ..... Called surge But you are missing the point. 0.7 amp power supply 0.7 amp camera ......yes that's a match. But you have taken nothing into account ....... You have not taken into account cable length cable size (you say 26) and another you powered baluns (why buy baluns with lights on when it's never needed) there just cheap. 0.7amp at power supply ...... First balun power ...... 26cat .......second balun power ........ Will not give you 0.7 at camera. Baluns with a stupid gimmick lights that have no purpose. Cheap baluns ....... 26 cat........ Power supply at limit ........= cheap install no room for any allowance...... Let's say in a few weeks you go back and replace a camera with a 1 amp ........ You can't

Do you have a dvr or NVR ? And is it a dauha.... How old is it

The problem is you don't even try and see if it works ....... You are obsessed with 50.000 watts from a tower ...........and to be honest like you have just said in your last post if you move the camera by a inch might fix it....... Sit back in your chair and think about that . Something else you have posted 26 gauge cat5 ..... No repeatable CCTV engineer or network engineer would ever use that for an install ever Infact it has no reason to be in the industry anymore ..... We're am from licence does not allow it. And that problem also takes you back to the 0.7 amp using that cable makes it worse. Your using cvi cameras let me give you an example which might also let you think of your problem. A building with 4 cvi cameras on each corner ..... Say the minimum is 1 amp each that's 12v 4amp power supply ...... Not big enough. It might do the job and show a little interference nothing to be bothered about. But look at why there might be a little interference....... Cvi need a little more amps when it starts to work....... Cloud cover cam 1 person goes past cam 2 car goes past cam 3 .............all 3 cameras need a little more amp ..... Your power supply is already at its max but as cam 4 is not doing extra work it's amps will drop going to the rest of the cameras ....... Cam 4 has lost amps and that will show as interference......... Well not interference just not enough amps to run properly And it's the same with IR 4 cameras minimum 1 amp 12v 4amp power supply No allowance has been made for power surge ..... Two cams switch on IR at same time the other two will show a problem ...... Only for a second or so but a problem. Your system 16 cameras on 12v 12amp power supply only gives 0.75 amp each camera you are already at the max ...... You can under amp a cam but never over amp And before you sort any of that out. It does not matter how you see it.....it is under powered and on wrong cable and for $10 more for a 12v 40amp 16way power supply giving 2.5amp each camera ...... But your cat5 will be hard at that distance.... But like in my first post ...... On that camera change balun for none rj45 type use 1 pair for video not two ( you never use 2) and the rest on power with Screw on power plug and use 1 12v 5amp power supply for that camera Or go 24v AC at dvr end and convert back at cameras end .... That will also solve your problem

I think it has nothing to do with my NVR. Cause when I click on + icon, idmss doen't know what will I add. I guess there is some problem with idmss lite. Hi. It can’t have anything to do with the app or everyone would have the problem You never answered password question If your not 8 or over or have a mix of letters and numbers it will not connect to the app

How strong is your password it must contain letters and numbers and 8 and above characters How old is your NVR ......and have you had from new .

Why do you need firmware

Please don't .....you can't even install your own right. Wrong Infact it passes through the balun case nothing to do with balun. Use a good balun use proper power supply and it fixes 0.7amp over that distance is your problem But no 50.000 watts is your problem. Would it be easier for me to explain it to your customer....... Save them having to go through the cost of faraday crap

Trust me no one want you to come in behind them for you to fix Can't wire a balun ..... Your own admition Don't understand power your own admition Faraday cages ....... That is the best .... If you do a line up of 5 installers I bet I could pic you out of the line You will be the one with tin foil on his head. And the sad thing is you don't agree with install standards

Wow ..... 100s of cameras and you can't even wire up a balun Industry standards is 1 pair .... The right way and the only way for a balun to work Power ....... 16 at 10-12amp ........ You can't even figure that one out and over that distance. Faraday cage ..... Well I can guarantee you are the first in the whole wide world to do it. Biggest load of crap ever. And you call me condescending.......... And you can't even install to standard Power supply ...... 0.7 amp over that distance on each .......... You have not taken into account surge or IR ...... 0.7 amp is useless Let's do a pole baluns 1 pair or 2 for video .............answer 1 power is 0.7 amp good enough for long distance IR. .........answer no. Let's see what others say

Which method are you using

You can’t use two pair for video it does not work. Power supply is not good enough You need to sort out the basics first. Why use baluns that need to be powered just for status lights ..... power that is better used for camera. Baluns with lightning protection.... that is crap .... On that cam ..., use standard balun with no power use only 1 pair of cat5 and use the rest for power on a 12v 5amp power supply ....... power not going through balun .... use one without pig tail

Hi. It is a security reminder to change the user name and password from default on your recorder or camera

Your welcome gals to help ... Just to add .... going h264 will use your storage up quick with that many 8mp cameras .... just something to keep an eye on

Hi..I would start by swapping the baluns .... your talking of 100m with power How many pairs is it using for power .... and why do you need fancy lights on a balun .... what size is your power supply amps Balun with lightning protection ??? You have honeycomb effect usually seen when a balun is not used

Hi. Watch nest change in next few months ...... Now in the hands of Google as of last week. For what you are looking for a NVR and IP cameras will do the same and you won't have the stupid monthly charges WHY do people think it's good to rent storage space for CCTV And let strangers see and hear you Look for a high MP camera 5 or 8mp if you want to zoom in later.

You have no clue. Yes that's called genuine products. We're talking gray / copy / counterfeit products. With CE mark with no inspection. The Chinese government was asked about miss use of the CE mark Which they copy exact....... They call it China export logo

Hi. That's just what you have a analog camera You don't see analog describe with dvr anymore but if you look for a dvr with 960h then your cam will work with that and control it. Just look for one in your budget

Hi. The good old Sanyo ..........Sanyo made some good cameras in there time. It would be easier to just connect your camera to a dvr. And then have all the benifits including the zoom command. That's you cheapest option. You can use your Pi but you would need to go the IP encoder option and you still would not have your zoom function unless you also buy a controller which cost a lot Standard BNC connection with power and data cable going to the TX ..... Which is A or + on a dvr Ground which is B or - on a dvr. Are you going to be using this as security or just via a monitor ?

No such thing as rejected CE mark ......... It's rejected before conformity. Gray / copy market ....... The CE is not real The manufacturer who holds the CE conformity...... Is where the liability starts

Well you will need too ...... But first remove all settings from your app. Set camera up next to router ......... Then press the VPS button Then you have 10 seconds to press the pair button on your camera .....looking from the front of cam it's on the left This will allow your camera past the hubs firewall

Bt home hub 5 Then looking at your router from the front your VPS button is on the top right. Have you used this to set your camera