tomcctv

Hi. You need to load as administrator

Hi that's the joy of wireless That d link can't be sold in many countries because if it's wireless band. Best if you can put a cable to your cameras if that is not possible then use power line adapters

Hi what app are you using

Hi. Is this the maplins kit ??? To test the hard drive ......... Remove it from your recorder and see if it starts up without the problem. It could also be the units power supply ...... To test power supply .... Use the one that powers your cameras to see if the unit stops booting

Hi. How many IP cameras are you thinking of using ??? Max with your equipment is 8 in total. So if you wanted to fill all 24 channels you would still need to buy a better NVR Your IP camera link ...... They may also not work with your current DVRs The part I am finding hard is you already have 2.2 MP cameras and you want to swap out for 2mp ........ And then have extra costs for switch and power supply and also cable change

The DVR has only 4 fysical connections but it can handle more IP based cameras at the same time. Hi ... no only 2 ip cameras and that is with having to lower frame rate. The ip link you have posted will not work with your dvr...... as in will not connect to 3rd party. But if you think changing cameras and cable to go ip is cheaper than changing the dvr out . You already have 2mp

Hi. Your best option is to spend money on replacing dvr. You will only be wasting money adding IP to a cheap dvr Your camera link is to 4 in1 camera modules which supports CVI so just buy a 32 way or 2 16 way cvi hybrid DVRs. No switches needed

No such thing ..... you will need a new dvr

Hi. No you can't You would have to change your analog dvr to a HD analog And I would look at cvi rarther than AHD

Another junk China website. Hotmail email Sponsored by amazon....... which is a lie

Hi it's called e-map Which cameras and recorders are you using ?

Blupoint is either dahua lite or the horrid Swann Why try to sell out of your region?? Would that not give the op problems from the start

Then you have a China system ... UTC time does not allow BST........ So you will always be an hour out.

Hi all time should be set to GMT .London Then you will not have the hour difference

Hi. You might find that a app called pocketcloud will be better for you

Hi. Qvis Quattro 5. Much better than the hik. Takes all camera formats so easier to buy cameras

Hi. Tenvis have always had that problem .... cheap camera with easy P2P setup to a China server. Best to buy something he can setup and stay away from p2p dns services from China

Hi. If you are using a recorder with your cameras then disable time stamp on your cameras which is the best way Which qvis system do you have ... will need to know for motion setup

Hi have you tried IVS dahua software ?

Hi. I have had the same problem I few times All leds must be on constant ..... it's a simple health check for HD

Ok ..... one of your HDD is faulty....... led lights tells me that . Also you can't format the HD and then install to dvr. Dvr must do the formatting I would start by installing one new HD .... new direct into dvr and see how that runs You should only have 1 green led on permanent

How many HDD are there

Hi. How old is your unit ....... Your link is to a 2u unit. What happends with the green led lights when you are running it with the lit off ?? (In centre of board) Are you running 16 or 32 analog cameras

Hi if it's a gray unit then don't do a firmware you will just end up with a paperweight Anything from hik website is for genuine hikvision

Did you connect all devices using the cloud login or local