tomcctv

AK357 is the expert on avigilon .....good to hear you got good advice and the help. It is good to hear technical advice from AK357 And knowing avigilon you will be happy.

Hi. I would stick with the standard 850. Or you will be limited to IR distance. With your budget I would look at the new dahua range 4K systems giving you colour both day and night

Like I said .... It will not be the modulator ..... The gui is on the screen so it's nothing to do with distance or cable. Did you check the camera connections and power supply

Hi. No need to make favourites. Just click on cam link top left ... that can't be hard. And there is a very good reason why most apps work this way is because some customers like to watch there system while at home or away. There is no point wasting cell internet when at home. So by clicking on cam link they could have say..... home .... for watching while home on there LAN ....away......is cell internet For pc at home .... some people find smart PSS hard to use. Just enter recorders local ip into browser and you get live link with basic control

I thought you said the 4 squares are showing on the tv but without camera image .?

Hi. You might not need to pay for a static. Virgin media ip does not change often over a year .... once or twice. I would setup port forwarding with what you already have.

Hi. If you have the 4 empty screens up then the modulator is doing its job. As for no screen images I would look at .... first..... have you plugged cameras into the right location on the back of your dvr ? You might have an 8 way and connected to 5-6-7-8 and if your dvr is only told to show 1-2-3-4. Second ...... did you mover camera power supply ..... have you plugged it back in

Hi the 1200 works well ... much better than wireless the netgear is using your existing wiring

Hi. I know the dahua and avermedia nvrs give 15 to 30 min delay (Delay playback)

Hi. First of all you need to understand mega pixel..... it is clear in your statement you don't Yes they always have for there large meg pixel...... how can you compare lorex low meg pixel to avigilon large megapixel?? How are you doing the zoom in lorex .... which is a dahua system There are two ways to zoom .... how are you doing it...... it also has zoom after burning off ... have you used that ? If you as a installer can not get a plate from 25ft with a 4mp. (Without zoom then give up on installing). An old 540tvl analog camera will pick a plate at 25ft. Again this points to the install and client training on handover..... You don't want a lecture........ a plate at 25ft with a 4mp camera in the day time is easy ....... you need to check if in fact your systems are set to 4mp also if system is recording at its highest res

Hi it will load remote viewer onto your pc.

Try this ... enter as below Http://192.168.1.3:4520

Hi. What is the ip ? And how are you entering it

What are you going on about ?? What system are you using that does not allow it ??

What happends when you just put dvr ip into browser

Hi. Can you not go direct to router ?

Hi. Hik does not support gray market cameras . When you buy hik cameras they no longer come with password installed. You have to create your own on first setup.

Lorex dahua have always had that function. And also on most name brand manufacturers

Yes you can ..... But you will need to power your cameras local And you only need to do one post

No no they are crap

Hi. You need to down load the new plugin...... Copy and paste direct into Firefox browser and it will auto load. File sent to your pm

Hi. Before you buy anything I would look at a turret camera ..... Much better than the old style dome cameras and a lot less problems. Also look for good IR range

Hi. The cables that come with the kits are cheap and nasty and will give problems on the power side. Run cat 5 to cameras locations and also run cables to places you might want cameras later. I would look at a CVI 1080p system or if budget allows a IP system

Hi. Now it's in Japanese hands that was the first thing they said they would do. Be interesting to see if they do a software for the old German made cameras

Hi. You will have basic user rights and changing your password will still only give user rights. If you can pm me your serial number and date and time I will give you a code. But this will only work on hikvision that came with a password out of the box.... new hikvision as from February don't have a factory password the installer has to generate one on first setup